Skyjacker TU2225MSP 2.5 in. Lift Kit With Front and Rear Metal Spacers. Skyjacker TU2225MSP

Conquer your exciting daily highway adventures and the trail's toughest terrains with a bold new attitude. The Toyota Tundra sits lower in the front than the rear. This factory rake, nose-down stance is very evident. The coil spring rear has a comfortable, but soft spring rate. This Skyjacker Metal Spacer Kit will raise the suspension clearance of your Tundra (2.5-Inch Front & 1.0-Inch Rear). Raising the suspension clearance of your Tundra gives you the freedom to add larger, more aggressive 295/60R20 tires for greater ground clearance. Added ground clearance will prevent you from scrubbing on turns and from bottoming out on the bumps, rocks, off-road debris or even a steep driveway. Retain your Tundra factory tuned performance front struts and rear coil springs by utilizing top mounted spacers to elevate the stance. Skyjacker's 1-piece top mount spacers have a strong tab-and-slot interlocked design. Engineered with camber offsets, front strut spacers integrate smoothly with OEM suspension geometry and function perfectly allowing the CV axles to operate within limits of OEM upper and lower control arms. (Front OEM strut stays assembled, so there is no need for a strut spring compressor.) Rear coil spring spacers fit into the OEM upper spring mount to gain a better level stance and function perfectly with the Tundra's factory coil springs. All steel metal construction (0.1875mm - 3/16 in.) with modern exact CNC laser cuts, CNC bends and breaks, CNC machining and expert welds. They are powder coated to provide an extremely durable protective barrier to prevent corrosion. Comes complete with quality grade mounting hardware. This Skyjacker Metal Spacer Kit is a great way to compensate for added front weight of accessories like a winch, off-road bumper or combination of both. Increase capabilities for added weight of an off-road rear bumper, toolbox, bed rack or other overland accessories.

Specifications:

Lift/Drop Height	2.5 in.
WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	California Residents- WARNING: Cancer and-or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov)
Description_DES	2.5 in. Lift Kit With Front and Rear Metal Spacers.
Description_EXT	22 TUNDRA 2.5in.F/1in.R SPCR KT
Description_FAB	Matching Set Of 2.5-inch Front Top Mount Strut Spacers
Description_FAB	Matching Set Of 1-inch Rear Top Mount Coil Spring Spacers
Description_FAB	Strong Tab-and-slot Interlocked Integrity 1-piece Spacers
Description_FAB	Built-in Camber Correction To Optimized Ball Joint Angles
Description_FAB	Engineered To Operate \ Maintain Proper Suspension Geometry
Description_FAB	Visible Upgrade With Effortless Smooth Ride And Long Life
Description_FAB	EZ Bolt-On / No Cutting / Drilling Or Other Modifications Needed
Description_FAB	Front Struts Remain Assembled / No Strut Spring Compressor Needed
Description_FAB	Enjoy Enhanced Attitude And Increased Suspension Clearance
Description_MKT	Conquer your exciting daily highway adventures and the trail's toughest terrains with a bold new attitude. The Toyota Tundra sits lower in the front than the rear. This factory rake, nose-down stance is very evident. The coil spring rear has a comfortable, but soft spring rate. This Skyjacker Metal Spacer Kit will raise the suspension clearance of your Tundra (2.5-Inch Front & 1.0-Inch Rear). Raising the suspension clearance of your Tundra gives you the freedom to add larger, more aggressive 295/60R20 tires for greater ground clearance. Added ground clearance will prevent you from scrubbing on turns and from bottoming out on the bumps, rocks, off-road debris or even a steep driveway. Retain your Tundra factory tuned performance front struts and rear coil springs by utilizing top mounted spacers to elevate the stance. Skyjacker's 1-piece top mount spacers have a strong tab-and-slot interlocked design. Engineered with camber offsets, front strut spacers integrate smoothly with OEM suspension geometry and function perfectly allowing the CV axles to operate within limits of OEM upper and lower control arms. (Front OEM strut stays assembled, so there is no need for a strut spring compressor.) Rear coil spring spacers fit into the OEM upper spring mount to gain a better level stance and function perfectly with the Tundra's factory coil springs. All steel metal construction (0.1875mm - 3/16 in.) with modern exact CNC laser cuts, CNC bends and breaks, CNC machining and expert welds. They are powder coated to provide an extremely durable protective barrier to prevent corrosion. Comes complete with quality grade mounting hardware. This Skyjacker Metal Spacer Kit is a great way to compensate for added front weight of accessories like a winch, off-road bumper or combination of both. Increase capabilities for added weight of an off-road rear bumper, toolbox, bed rack or other overland accessories.
Description_SHO	2.5 in. Lift Kit