Holley 16-109 HydraMat Fuel Reservoir System Holley 16-109

The amazing HydraMat(R) is Holleys patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.

Specifications:

Description_DES	HydraMat Fuel Reservoir System
Description_EXT	HydraMat Fuel Reservoir System; 24 in. Long x 15 in. Wide Rectangle; 15 Micron; Center/Side/Side Outlet 1/2 in. NPT;
Description_FAB	Patent Pending Solves Problems w/Traditional Fuel Pick-Ups
Description_FAB	Reduces Potential For Air To Enter Fuel System
Description_FAB	Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel
Description_FAB	Surface Tension/Fluid Wicking Allow Hydramat To Draw Fuel
Description_FAB	Area Of Hydramat Is Uncovered Tiny Pores In Media Seal
Description_FAB	Internal Reservoir Assists Fuel Available At The Pickup
Description_FAB	Eliminates Specialty Reservoirs Sumps/Pick Up Pumps
Description_FAB	No Need For A Separate Filter Before The Fuel Pump
Description_FAB	Can Be Folded and Compressed For Easy Install
Description_FAB	Hydramats Fit A Variety Of Stock Fuel Tanks/Race Fuel Cells
Description_MKT	The amazing HydraMat(R) is Holleys patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.
Description_SHO	Fuel Tank Pickup