Innovate Motorsports 38370 LM-2 Air/Fuel Ratio Meter; Single O2 Basic Kit 3837 Innovate Motorsports 38370

The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter's award-winning digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2's self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. With the provided LM Programmer software these analog outputs may also be defined by the user.

Specifications:

WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	WARNING: This product can expose you to chemicals; which are known to the State of California to cause cancer. For more information; visit www.p65warnings.ca.gov.
Description_DES	LM-2 Air/Fuel Ratio Meter; Single O2 Basic Kit 3837
Description_EXT	LM-2: Handheld Digital Wideband Air/Fuel Ratio Meter/Datalogger; Single O2; BASIC Kit
Description_FAB	100 pct. Digital Wideband Air/Fuel Ratio Technology
Description_FAB	Built-In RPM Converter [Direct Freq. or w/Opt. Inductive Clamp]
Description_FAB	Large High-Contrast Graphics LCD
Description_FAB	Log Directly To SD Card
Description_FAB	OBDII Scan Tool-Read/Clear DTCs and Log Up to 16 Channels
Description_FAB	Patented DirectDigital Wideband Sensor Control
Description_FAB	Playback Log Data On Screen And/Or w/Powerful LogWorks Software
Description_FAB	Single or Dual Channel A/F Version Available
Description_FAB	Wideband O2 Compatible w/All Fuel Types
Description_INV	LM-2 Air/Fuel Ratio; Single O2 Basic Kit
Description_MKT	The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter's award-winning digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2's self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. With the provided LM Programmer software these analog outputs may also be defined by the user.
Description_SHO	LM-2 AFR Single Kit