Fabtech K1045M Raised Torsion Suspension Lift System; w/Stealth Monotube Shocks; 6 in. Lift; Fabtech K1045M

Fabtechs cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6 RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading.. The 6 RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point.High arched crossmembers and front differential skid plate are constructed of 1/4 thick steel to resist bending from hard front suspension impacts. Only 1/4 thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 RTS(TM) system allows the use of both 18 and 20 diameter wheels.

Specifications:

Lift/Drop Height	6 in.
WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.
Description_DES	Raised Torsion Suspension Lift System
Description_EXT	Raised Torsion Suspension Lift System; w/Stealth Monotube Shocks; 6 in. Lift;
Description_FAB	The All New RTS™ Raised Torsion Suspension System Utilizes
Description_FAB	Patent Pending Torsion Bar Brackets That Keep The Torsion Bars
Description_FAB	Raised Up In The Stock Location
Description_FAB	This Feature Provides Superior Ground Clearance At The Frame
Description_FAB	As There Is No Torsion Bars Hanging Down To Become High
Description_FAB	Centered On Or Damaged When Offroading
Description_FAB	This Industry Leading System Rewrites How An IFS Suspension
Description_FAB	System Should Function For Ultimate Offroad Use With Great
Description_FAB	Highway Manners
Description_MKT	Fabtechs cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6 RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading.. The 6 RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point.High arched crossmembers and front differential skid plate are constructed of 1/4 thick steel to resist bending from hard front suspension impacts. Only 1/4 thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 RTS(TM) system allows the use of both 18 and 20 diameter wheels.
Description_SHO	LftKt-Suspw/Shock