BMW 328i Trailer Hitch Buyers Guide (Canada)

Shopping a trailer hitch for a BMW 328i in Canada? Start with the door-sticker year on this sedan, then open CURT 11367. That Class 1 hitch uses a one and one quarter inch receiver. The live storefront title lists two thousand eleven through two thousand sixteen BMW 3 Series and BMW 328i years on the same stocked carton, and the live product path also shares listed 4 Series years on that sheet. Honest shared-carton talk with the 3 Series and 4 Series guides is the reason this 328i lander exists. Bike racks and light utility are the usual ask when the BMW sticker agrees. Confirm ratings on the live product card. Canada orders often ship free on qualifying baskets, so confirm the cart note before you check out.

Parts-counter shortcut. Read the door sticker, confirm your 328i year against live 11367, then shop one and one quarter inch mounts that match the tube. Broader Canada shopping help lives in our buying guide, how to choose a hitch, what hitch class do I need, BMW 3 Series hitch guide, and BMW 4 Series hitch guide when the badge is the coupe or convertible shelf. Prefer the full index? Open the towing guides hub.

Watch these CURT videos first

All four videos are from the official CURT YouTube channel (@curtmfg). Use them for class selection, install habits, wiring basics, and ball-mount height before you dig into the product cards below.

If an embed does not load, use the YouTube link under the card. BMW 328i shoppers usually land on Class 1 one and one quarter inch hardware on the shared 11367 carton that also covers listed 3 Series and 4 Series years on the live fitment.

How to Select a Trailer Hitch

CURT - Hitch class basics

Match hitch class to the door sticker and the live card before you shop a heavier trailer than the vehicle can honestly tow.

Watch on YouTube

Trailer Hitch Installation Techniques

CURT - Install habits

Confirm the live card still lists your year and configuration. Shared sheets are easy to mix up when sibling badges sit nearby.

Watch on YouTube

How to Connect a Trailer Wiring Harness

CURT - Wiring basics

Plan lights after the hitch. A four-flat or seven-way still needs a clean ground before the first night tow.

Watch on YouTube

How to Choose a Ball Mount and Trailer Ball

CURT - Ball mount height

Match shank size to the live tube, then level the trailer with rise versus drop once the hitch is on.

Watch on YouTube

The live hitch path for listed 328i years

CURT 11367 is a Class 1 hitch with a one and one quarter inch receiver path. On the live storefront title the card lists two thousand eleven through two thousand sixteen BMW 3 Series and BMW 328i years. The same stocked carton also covers listed BMW 4 Series years on the live product path. Gross trailer weight on the live card is two thousand pounds with two hundred pounds tongue weight. Your BMW door sticker still sets the ceiling.

Shared-carton honesty is the whole point of this lander. If you own a broader 3 Series badge in the listed window, the existing 3 Series buyer guide is still the cleaner landing page. 4 Series coupe and convertible shoppers should open the existing 4 Series hitch guide. We are not inventing a second hitch for the 328i badge. Use this 328i lander when you want the 328i year pages that already live on this store.

Class 1 one and one quarter inch hardware suits bike racks and light utility when the BMW sticker and the live hitch card both agree. Dedicated trailer wiring still needs a harness title that lists your year. Do not invent a heavier two inch Class 3 path for this shared Class 1 carton unless a different live SKU still lists your exact car.

How to shop without getting lost

Step 1Read the door sticker

Find the BMW tow and tongue numbers for your 328i. The hitch cannot raise that limit.

Step 2Confirm 328i fitment

Open live 11367 and confirm your sedan year is still listed before you order.

Step 3Match the tube

Pins, mounts, and racks must fit the one and one quarter inch tube on this Class 1 path.

Step 4Use sibling guides when needed

Broader 3 Series and 4 Series shopping stay on those existing guides.

Class 1 carton

11367 Class 1

Class 1 path for listed 328i years on the stocked carton.

  • One and one quarter inch receiver path on the live product
  • Two thousand pound gross rating on the live card
  • Confirm tongue weight on the product card
Shared-sheet honesty

3 Series and 4 Series

One stocked hitch covers sibling BMW years when the live fitment agrees.

  • 328i shoppers stay on this guide
  • Broader 3 Series shoppers use the 3 Series guide
  • 4 Series shoppers use the 4 Series guide
Tube honesty

Not a two inch Class 3

This sedan path stays on the smaller tube.

  • Shop one and one quarter inch mounts only
  • Bike racks are the usual light-duty ask
  • Confirm the live card before you force a heavier setup

Year pages that already exist

These BMW 328i year landers are already live. We only link pages that return on this store.

Always confirm the live hitch card still lists your 328i year before you order. Year landers help navigation, but the live product fitment is the final check. Shared 3 Series and 4 Series year pages may also return for the same carton, and we are not inventing missing 328i landers here.

Related guides worth opening

Parts-counter summary: 328i shoppers start with live CURT 11367, confirm the sedan year on the live fitment even when the storefront title also names broader 3 Series wording and shares listed 4 Series years, match one and one quarter inch accessories, and open the 3 Series or 4 Series guides when the badge is that sibling shelf rather than these 328i landers.