Jeep Wrangler Trailer Hitch Buyer’s Guide (Canada)

CURT hitches for the Jeep Wrangler

A hitch turns your Wrangler into the one that takes a bike rack, a cargo carrier, a utility trailer or a small boat. CURT builds six hitches for the Jeep Wrangler from 1987 to 2026, Class 3, rated 3,500 lb to 5,000 lb, from $170.43 CAD with free shipping anywhere in Canada.

Your year decides the part. Find it in the table, open the year page for the exact hitch, price and wiring, and you're done in a few minutes.

Pick your yearEvery hitch that fits

Newest fitCURT 13392Class 3, 2-inch receiver, 5,000 lb / 500 lb tongue
2007 through 2026 Wrangler, not Diesel$176.95 CADSee the hitch →

Which hitch fits your Wrangler, by year

	Years	Hitch	Class, receiver, rating	Price
	2007 through 2026 Wrangler	CURT 13392 not Diesel	Class 3, 2-inch receiver, 5,000 lb / 500 lb tongue	$319.49 CAD
	2020 through 2023 Wrangler	CURT 13564	Class 3, 2-inch receiver, 3,500 lb / 350 lb tongue	$219.79 CAD
	2007 through 2017 Wrangler	CURT 13432	Class 3, 2-inch receiver, 3,500 lb / 350 lb tongue	$170.43 CAD
	1997 through 2006 Wrangler	CURT 13408	Class 3, 2-inch receiver, 4,000 lb / 400 lb tongue	$443.78 CAD
	1997 through 2006 Wrangler	CURT 13430	Class 3, 2-inch receiver, 4,000 lb / 400 lb tongue	$426.61 CAD
	1987 through 1988 and 1991 through 1995 Wrangler	CURT 13657	Class 3, 2-inch receiver, 3,500 lb / 350 lb tongue	$526.63 CAD

Pick your Wrangler year

Each year page has the hitch, the harness and the ball mount that go together, with the price of each.

CURT parts for the Jeep Wrangler

Watch a Wrangler hitch go on

CURT's own install crew, start to finish, so you know what you're in for before the box arrives.

Wiring, ball mount and the rest

A bike rack needs nothing but the hitch. A trailer needs lights, and CURT 55124 ($47.40 CAD) is the four-flat harness that plugs into the Wrangler's factory connector for 2007 through 2017. No cutting, no scotch-locks. Other years have their own harness; the year page shows the right one.

Then a ball mount sized to the receiver: CURT 45836 ($41.70 CAD) drops straight into a 2-inch receiver. Pick the drop or rise that keeps the trailer level, and match the ball to the coupler. The ball mount guide covers both in two minutes.

Canadian winters eat hitch hardware. Salt and brine get into the receiver and the trailer plug, so a smear of grease on the pin, a cap on the receiver and a rinse under the bumper in spring keep a CURT hitch looking new for years. The rust and salt care guide has the full routine.

Jeep Wrangler hitch questions

Which CURT hitch fits my Jeep Wrangler?

It depends on the year. CURT 13392 is the newest, for 2007 through 2026, and the table above matches every other year to its part. Open your year page and the exact hitch, price and wiring are on it.

Can I put a bike rack on a Wrangler with this hitch?

Yes. The 2-inch receiver takes any 2-inch rack, and a loaded rack counts against the hitch's tongue weight (500 lb on CURT 13392), so a four-bike platform rack with bikes on it is well inside the limit.

Can I install the hitch myself?

Most owners do. CURT rates CURT 13392 a novice install, about 30 minutes with hand tools and a jack. The main body tucks behind the bumper so only the receiver shows. The install video above is the real job, uncut.

How much can a Wrangler tow with a CURT hitch?

The hitch is rated from 3,500 lb to 5,000 lb depending on the part, but the Wrangler's own tow rating in the owner's manual is the ceiling. The lower of the two numbers is your limit, every time.

Related guides