2018 Jeep Wrangler Trailer Hitch
The hitch that fits, the harness that plugs in, shipped free anywhere in Canada
Every part below is matched to the 2018 Jeep Wrangler, priced in Canadian dollars, and on its way to your door with no shipping charge.
CURT parts for the 2018 Jeep Wrangler
2007-2025 Jeep Wrangler / 2018 Jeep Wrangler Jk + Class 3 Trailer Hitch CURT 13392
$176.95
2018-2026 Jeep Wrangler / 2020-2026 Jeep Gladiator Front Receiver Hitch CURT 31086
$266.61
CURT 56407 4-FLAT WIRE HARNESS 18-26 WRANGLER/ 20-26 GLADIATOR CURT 56407
$142.54A Class 3 hitch puts a bike rack, a cargo carrier, a utility trailer or a small boat behind your 2018 Jeep Wrangler. CURT 13392 is a Class 3 hitch with a 2-inch receiver, rated to 5,000 lb gross trailer weight and 500 lb tongue weight, $319.49 CAD. It doesn't fit a Wrangler with a Diesel. Shipping is free anywhere in Canada.
CURT calls the install a novice job, about 30 minutes with hand tools, and the main body tucks up behind the bumper so only the receiver shows.
There's a front receiver too. CURT 31086 mounts behind the front bumper of the 2018 Jeep Wrangler, rated to 3,500 lb with 350 lb tongue weight, $266.61 CAD.
Trailer lights are a plug-in job on this one. CURT 56407 is the four-flat plug harness for the 2018 Jeep Wrangler, $142.54 CAD, and it clicks into the factory connector so you're not splicing wires behind the bumper.
What you need to tow with a 2018 Jeep Wrangler
A bike rack only needs the hitch. A trailer needs all three, and every piece ships free anywhere in Canada.
- CURT 13392 hitch, $319.49 CAD. The receiver that bolts to the Wrangler.
- CURT 56407 wiring harness, $142.54 CAD. Plugs in, no splicing; the trailer lights follow the Wrangler's.
- CURT 45836 ball mount, $41.70 CAD. Ball mount with the ball already on it, ready to hook a trailer. Bigger coupler? CURT 45041 carries a 2-5/16-inch ball, $62.42 CAD.
Watch the install
CURT's own crew bolting a hitch onto a Wrangler, so you can see what's involved before you order.
More Jeep Wrangler hitch years
2018 Jeep Wrangler hitch questions
Which trailer hitch fits a 2018 Jeep Wrangler?
CURT 13392 is a Class 3 hitch with a 2-inch receiver, rated to 5,000 lb gross trailer weight and 500 lb tongue weight. It doesn't fit a Wrangler with a Diesel.
How much can a 2018 Jeep Wrangler tow with this hitch?
The hitch is rated to 5,000 lb gross trailer weight and 500 lb tongue weight, or 5,000 lb with a weight-distribution hitch. Your Wrangler has its own tow rating in the owner's manual, and the lower number is your limit. A loaded bike rack counts against tongue weight too.
Do I need a wiring harness for the 2018 Jeep Wrangler?
If a trailer is going on, yes. Brake and turn signals have to work, and CURT 56407 plugs into the factory connector so the trailer lights follow the Wrangler's. Order it with the hitch and it's one install.
Will it fit my Wrangler?
Nearly every build, with a few exceptions. It doesn't fit a Wrangler with a Diesel. The full fit table is on each product page, so check it before you order.
More for this vehicle
- Jeep Wrangler Floor Liner Buyer's Guide
- Jeep Wrangler Cargo Liner Buyer's Guide
- Jeep Wrangler Mud Flap Buyer's Guide
- Jeep Wrangler Trailer Hitch Buyer’s Guide
