2008 Jeep Wrangler Trailer Hitch

Fits the 2008 Jeep Wrangler

The hitch that fits, the harness that plugs in, shipped free anywhere in Canada

Every part below is matched to the 2008 Jeep Wrangler, priced in Canadian dollars, and on its way to your door with no shipping charge.

Shop the partsAll trailer hitches
CUR-13392_01.jpg
Trailer hitchCURT 133922007-2025 Jeep Wrangler / 2018 Jeep Wrangler Jk + Class 3 Trailer Hitch CURT 13392 $176.95 CAD See the part →

CURT parts for the 2008 Jeep Wrangler

CUR-13392_01.jpg
Hitch

2007-2025 Jeep Wrangler / 2018 Jeep Wrangler Jk + Class 3 Trailer Hitch CURT 13392

$176.95
CUR-13432_01.jpg
Hitch

2007-2017 Jeep Wrangler / 2018 Jeep Wrangler Jk Class 3 Trailer Hitch CURT 13432

$170.43
CUR-31432_01.jpg
Hitch

CURT 31432 2" FRONT RECEIVER HITCH 07-18 JEEP WRANGLER JK CURT 31432

$324.54
CUR-55124_01.jpg
Wiring

2007-2017 Jeep Wrangler / 2018 Jeep Wrangler Jk Trailer Wiring Harness CURT 55124

$47.40

Your 2008 Jeep Wrangler has two CURT hitches to choose from, and the right one comes down to what you're pulling and what you'll hang off the receiver. CURT 13392 is a Class 3 hitch with a 2-inch receiver, rated to 5,000 lb gross trailer weight and 500 lb tongue weight, $319.49 CAD. It doesn't fit a Wrangler with a Diesel.

CURT 13432 is a Class 3 hitch with a 2-inch receiver, rated to 3,500 lb gross trailer weight and 350 lb tongue weight, $170.43 CAD. Both ship free anywhere in Canada.

There's a front receiver too. CURT 31432 mounts behind the front bumper of the 2008 Jeep Wrangler, rated to 3,500 lb with 350 lb tongue weight, $324.54 CAD.

Trailer lights are a plug-in job on this one. CURT 55124 is the four-flat plug harness for the 2008 Jeep Wrangler, $47.40 CAD, and it clicks into the factory connector so you're not splicing wires behind the bumper.

What you need to tow with a 2008 Jeep Wrangler

A bike rack only needs the hitch. A trailer needs all three, and every piece ships free anywhere in Canada.

  1. CURT 13392 hitch, $319.49 CAD. The receiver that bolts to the Wrangler.
  2. CURT 55124 wiring harness, $47.40 CAD. Plugs in, no splicing; the trailer lights follow the Wrangler's.
  3. CURT 45836 ball mount, $41.70 CAD. Ball mount with the ball already on it, ready to hook a trailer. Bigger coupler? CURT 45041 carries a 2-5/16-inch ball, $62.42 CAD.

Watch the install

CURT's own crew bolting a hitch onto a Wrangler, so you can see what's involved before you order.

Class 3 install on a JL Wrangler · Watch on YouTube
Class 3 install on a JK Wrangler · Watch on YouTube

More Jeep Wrangler hitch years

2002 Jeep Wrangler2003 Jeep Wrangler2004 Jeep Wrangler2005 Jeep Wrangler2006 Jeep Wrangler2007 Jeep Wrangler2009 Jeep Wrangler2010 Jeep Wrangler2011 Jeep Wrangler2012 Jeep Wrangler2013 Jeep Wrangler2014 Jeep WranglerJeep Wrangler hitch guide, all yearsAll trailer hitches

2008 Jeep Wrangler hitch questions

Which trailer hitch fits a 2008 Jeep Wrangler?

CURT 13392 (Class 3, 2-inch receiver, 5,000 lb) and CURT 13432 (Class 3, 2-inch receiver, 3,500 lb) both fit. Pick the class that covers your trailer with room to spare, then check the fit table on the product page for your build.

How much can a 2008 Jeep Wrangler tow with this hitch?

The hitch is rated to 5,000 lb gross trailer weight and 500 lb tongue weight, or 5,000 lb with a weight-distribution hitch. Your Wrangler has its own tow rating in the owner's manual, and the lower number is your limit. A loaded bike rack counts against tongue weight too.

Do I need a wiring harness for the 2008 Jeep Wrangler?

If a trailer is going on, yes. Brake and turn signals have to work, and CURT 55124 plugs into the factory connector so the trailer lights follow the Wrangler's. Order it with the hitch and it's one install.

Will it fit my Wrangler?

Nearly every build, with a few exceptions. CURT 13392 doesn't fit a Wrangler with a Diesel. The full fit table is on each product page, so check it before you order.

More for this vehicle

Shop the category

All towing & hitch guides →