Buick Envision Trailer Hitch Buyer’s Guide (Canada)

Shopping a trailer hitch for a Buick Envision in Canada? Start with the year on the door sticker before you open a CURT Class 3 card, because the two live hitch SKUs do not share the same tongue rating story. We stock CURT 13405 for listed 2019 through 2020 Envision years and CURT 13479 for listed 2021 through 2022 Envision years. Dedicated wiring CURT 56364 covers listed 2017 through 2020 Envision years, and CURT 56325 covers listed 2021 through 2025 Envision years on a shared multi-vehicle harness card. Early 2016 through 2018 hitch coverage is an honest gap on this shelf.

Built for Canadian Buick Envision owners and shops. Free shipping on CURT towing gear from Lots of Parts when the SKU is live on this store. New to hitch shopping? Start with the buying guide, how to choose a hitch, and what hitch class do I need. Prefer the full index? Open the towing guides hub.

Watch these CURT videos first

All four videos are from the official CURT YouTube channel (@curtmfg). Use them for class selection, install habits, wiring basics, and ball-mount height before you dig into the Envision cards below.

If an embed does not load, use the YouTube link under the card.

How to Select a Trailer Hitch

CURT · Hitch class basics

Why a compact luxury crossover like the Envision often lands on a Class 3 two-inch receiver, then still respects the door-sticker tow limit even when the hitch class looks truck-adjacent.

Watch on YouTube →

Trailer Hitch Installation Techniques

CURT · Install habits

Torque and hardware habits that keep a crossover hitch install clean under the rear bumper cover.

Watch on YouTube →

How to Connect a Trailer Wiring Harness

CURT · Wiring basics

How a vehicle-specific four-flat is meant to plug in when 56364 or 56325 lists your Envision year.

Watch on YouTube →

How to Choose a Ball Mount and Trailer Ball

CURT · Ball-mount height

Drop versus rise so a trailer or rack sits level behind a crossover bumper instead of riding nose-down.

Watch on YouTube →

Which CURT hitch fits your Buick Envision

Read the year first. Listed 2019 through 2020 Envision years open CURT 13405, a Class 3 hitch with a two-inch receiver rated to three thousand five hundred pounds gross trailer weight and five hundred twenty-five pounds tongue weight on the card. Listed 2021 through 2022 Envision years open CURT 13479, also a Class 3 two-inch hitch, but the live card rates it to two thousand pounds gross trailer weight and two hundred pounds tongue weight. That rating drop is real. Match the year, then read the door sticker before you plan a load. We do not invent an early 2016 through 2018 hitch SKU on this shelf.

Wiring that actually lists the Envision

CURT 56364 covers listed 2017 through 2020 Envision years. CURT 56325 covers listed 2021 through 2025 Envision years and also lists XT5, XT6, Blazer, and Acadia years on the same harness card. Confirm Envision is listed before you buy, and do not stretch XT5 exclusions onto an Envision without reading the live notes.

Parts-counter notes before you click buy

Topic What we tell shoppers
Class 3 with a caveat Both hitch cards are Class 3 with a two-inch tube, but 13479 carries a lower card rating than 13405. Read both the hitch card and the door sticker.
Early hitch gap We do not invent an in-stock Envision hitch for 2016 through 2018 on this shelf, even when early wiring 56364 starts in 2017.
2022 year lander 13479 lists 2022, but we only publish Envision year landers through 2021 today. Confirm the product card if your door sticker says 2022.
Shared 56325 harness 56325 also lists XT5, XT6, Blazer, and Acadia. Confirm Envision and any trim exclusions on the live card.
Receiver size Two-inch tube. Match pins, locks, covers, and rack shanks to that size, or use a listed reducer only when the accessory card allows it.
Encore kept separate Encore and Encore GX have their own guides and Class 1 stories. Do not stretch Envision Class 3 cards onto an Encore.
Enclave kept separate Enclave is a different Buick SUV path. Keep Envision shopping on these cards.

Year pages we publish for the Buick Envision

Year jumps we publish for the Buick Envision. Open the lander that matches the model year on your door sticker.

These are the Buick Envision hitch year pages we publish today. Confirm the product-card years before you buy. We do not invent years that are not on this list.

2019 through 2020

CURT 13405

Class 3 two-inch hitch with the higher tongue rating on this Envision shelf.

2021 through 2022

CURT 13479

Class 3 two-inch hitch with strong later qty and a lower card rating. Read the door sticker.

Wiring split

56364 and 56325

Early versus later Envision four-flat windows. Match harness year to hitch year.

Honest gap

2016 through 2018 hitch

No invented early hitch SKU on this shelf. Ask the shop before you force a wrong card.

How to order without second-guessing

Step 1Match the year

Door sticker year decides 13405 versus 13479, or an early gap.

Step 2Read both ratings

Hitch card rating and Buick door-sticker limit. The lower number wins.

Step 3Add 56364 or 56325

Match the harness window to the hitch window.

Step 4Match the tube

Two-inch receiver for racks, pins, covers, and ball mounts.

Related guides we do publish

Lots of Parts · Canada Buick Envision trailer hitch buyer guide with live CURT 13405, 13479, 56364, and 56325. No fake reviews, no invented SKUs.