Chevrolet Spark Trailer Hitch Buyer’s Guide (Canada)

Shopping a trailer hitch for a Chevrolet Spark in Canada? Start with the door-sticker year, then open the live CURT Class 1 card. We stock CURT 11433 for listed 2016 through 2022 Spark years with a one and one quarter inch receiver, two thousand pounds gross trailer weight, and two hundred pounds of tongue weight on the hitch card. That is the strongest dedicated Spark hitch qty on this shelf right now. We do not invent a second Spark hitch SKU or a dedicated Spark wiring harness when the live catalogue does not show one in stock.

Built for Canadian Chevrolet Spark owners and shops. Free shipping on CURT towing gear from Lots of Parts when the SKU is live on this store. New to hitch shopping? Start with the buying guide, how to choose a hitch, and what hitch class do I need. Prefer the full index? Open the towing guides hub.

Watch these CURT videos first

All four videos are from the official CURT YouTube channel (@curtmfg). Use them for class selection, install habits, wiring basics, and ball-mount height before you dig into the Spark card below.

If an embed does not load, use the YouTube link under the card.

How to Select a Trailer Hitch

CURT · Hitch class basics

Why a city hatch like the Spark usually lands on a Class 1 receiver for bike racks and light utility trailers, then still respects the door-sticker tow limit.

Watch on YouTube →

Trailer Hitch Installation Techniques

CURT · Install habits

Torque and hardware habits that keep a unibody Spark hitch install clean under a short rear bumper cover.

Watch on YouTube →

How to Connect a Trailer Wiring Harness

CURT · Wiring basics

How a vehicle-specific four-flat is meant to plug in when a harness lists your year. Spark wiring is thin on this shelf, so treat lights as a separate confirmation.

Watch on YouTube →

How to Choose a Ball Mount and Trailer Ball

CURT · Ball-mount height

Drop versus rise so a light trailer or rack sits level behind a short Spark bumper instead of riding nose-down.

Watch on YouTube →

Which CURT hitch fits your Chevrolet Spark

Spark shopping on this shelf is simple when your year lands on the card. CURT 11433 is the Class 1 hitch with a one and one quarter inch receiver tube for listed 2016 through 2022 Spark years. Two thousand pounds gross trailer weight and two hundred pounds of tongue weight sit on the hitch card. Earlier Spark years are not on this live card, and we will not invent a SKU to cover them.

Class 1 · Spark 2016 through 2022 CURT 11433 Listed 2016 through 2022 Chevrolet Spark Class 1 hitch with a one and one quarter inch receiver. Strongest Spark hitch qty on this page.

Parts-counter notes before you click buy

Topic What we tell shoppers
Class 1 reality This is a light-duty Class 1 hitch. Plenty of Spark owners want a bike rack or a small utility trailer. Do not invent a Class 3 truck hitch for this hatch.
Year window 11433 lists 2016 through 2022. Confirm the door sticker before you treat an older Spark as automatic.
Receiver size One and one quarter inch tube. Match pins, locks, covers, and rack shanks to that size.
Wiring gap We are not inventing an in-stock Spark-specific harness on this page. If you need trailer lights, confirm a live harness card or a shop lighting plan before you buy.
Door sticker Hitch class is not the Chevrolet tow limit. Read the door sticker before you load tongue weight.
Short bumper Sparks sit low and short. Plan ball-mount height carefully so a rack or trailer does not scrape on steep cottage ramps.
Volt path Chevrolet Volt stays on its own buyer guide. Do not stretch Spark cards onto a Volt.
Install habits Use the CURT install techniques video and the weekend checklist. Recheck hardware after the first trips with hitch bolt torque tips.
Earlier years We do not invent an in-stock Spark hitch outside the live 11433 fit list.

Year pages we publish for the Chevrolet Spark

Year jumps we publish that overlap the live Spark hitch card. Open the lander that matches the model year on your door sticker.

These are the Chevrolet Spark hitch year pages we publish today. Confirm the product-card years before you buy. We do not invent years that are not on this list.

Hitch shelf

CURT 11433

Listed 2016 through 2022 Spark Class 1 with a one and one quarter inch tube. Deepest Spark hitch qty here.

Honest gap

Wiring

No dedicated in-stock Spark harness on this page. Confirm lights separately if you tow.

Bike rack

Class 1 use

Most Spark shoppers want a rack. Read bike rack only and still respect the door sticker.

Install help

Videos and checklist

Use how to use CURT install videos and the weekend checklist.

Bike rack and light trailer reality

Most Spark hitch shoppers in Canada want a rack for bikes or a small utility trailer for the apartment-to-cottage run. That is a Class 1 conversation. If you only need a rack, read hitch for bike rack only and still respect the door sticker. For receiver size habits, see hitch receiver size guide.

Step 1Confirm the year

11433 covers listed 2016 through 2022. Earlier Sparks are an honest gap here.

Step 2Open the hitch card

Match 11433 to the live year window, then confirm receiver tube size.

Step 3Plan lights honestly

Do not invent a Spark harness SKU. Confirm a live lighting path if you need trailer lights.

Step 4Plan the install

Watch the CURT install video habits, then use the weekend checklist before you start.

Related guides we do publish

Volt hitch guideRelated Chevy plug-in Cruze hitch guideRelated Chevy compact Yaris hitch guideCompeting city hatch Bike rack onlyWhen Class 1 is enough Bolt torque tipsRecheck after first trips Towing guides hubAll vehicle and topic guides

Shop CURT 11433

In-stock 2016 through 2022 Spark Class 1 hitch with a one and one quarter inch receiver — the strongest Spark hitch qty on this Canada shelf.

Open CURT 11433 →

Also useful: bike rack only and CURT install videos.

Back to towing guides hub →

Lots of Parts · Canada Chevrolet Spark hitch buyer guide with live CURT 11433. No fake reviews, no invented SKUs.