Chrysler 200 Trailer Hitch Buyer’s Guide (Canada)
A hitch turns your 200 into the one that takes a bike rack or a small cargo carrier. CURT builds two hitches for the Chrysler 200 from 2011 to 2017, Class 1, rated 2,000 lb to 2,000 lb, from $282.35 CAD with free shipping anywhere in Canada.
Your year decides the part. Find it in the table, open the year page for the exact hitch, price and wiring, and you're done in a few minutes.
2015 through 2017 200$288.77 CADSee the hitch →
Which hitch fits your 200, by year
| Years | Hitch | Class, receiver, rating | Price | |
|---|---|---|---|---|
 |
2015 through 2017 200 | CURT 11403 | Class 1, 1-1/4 inch receiver, 2,000 lb / 200 lb tongue | $288.77 CAD |
 |
2011 through 2014 200 | CURT 11133 | Class 1, 1-1/4 inch receiver, 2,000 lb / 200 lb tongue | $282.35 CAD |
Pick your 200 year
Each year page has the hitch, the harness and the ball mount that go together, with the price of each.
CURT parts for the Chrysler 200
Wiring, ball mount and the rest
A bike rack needs nothing but the hitch. A trailer needs lights, and CURT 56211 ($115.42 CAD) is the four-flat harness that plugs into the 200's factory connector for 2011 through 2014. No cutting, no scotch-locks. Other years have their own harness; the year page shows the right one.
Then a ball mount sized to the receiver: CURT 45521 ($51.38 CAD) drops straight into a 1-1/4 inch receiver. Pick the drop or rise that keeps the trailer level, and match the ball to the coupler. The ball mount guide covers both in two minutes.
Canadian winters eat hitch hardware. Salt and brine get into the receiver and the trailer plug, so a smear of grease on the pin, a cap on the receiver and a rinse under the bumper in spring keep a CURT hitch looking new for years. The rust and salt care guide has the full routine.
Chrysler 200 hitch questions
Which CURT hitch fits my Chrysler 200?
It depends on the year. CURT 11403 is the newest, for 2015 through 2017, and the table above matches every other year to its part. Open your year page and the exact hitch, price and wiring are on it.
Can I put a bike rack on a 200 with this hitch?
Yes. The 1-1/4 inch receiver takes any 1-1/4 inch rack, and a loaded rack counts against the hitch's tongue weight (200 lb on CURT 11403), so a four-bike platform rack with bikes on it is the most you'd want on it.
Can I install the hitch myself?
Most owners do. CURT rates CURT 11403 a novice install, about 40 minutes with hand tools and a jack. The main body tucks behind the bumper so only the receiver shows. The install video above is the real job, uncut.
How much can a 200 tow with a CURT hitch?
The hitch is rated from 2,000 lb to 2,000 lb depending on the part, but the 200's own tow rating in the owner's manual is the ceiling. The lower of the two numbers is your limit, every time.
