Dodge Durango Trailer Hitch Buyer’s Guide (Canada)

Shopping a trailer hitch for a Dodge Durango in Canada? Start with the years we actually publish. Our live hitch landers cover 2004 through 2009, and the rear Class 3 receivers we stock for Durango sit in that same window. Newer Durangos are a different story — many leave the factory with a receiver already fitted — so this guide maps what is on the shelf today without pretending every model year has a matching lander.

Built for Canadian Durango owners. Free shipping on CURT towing gear from Lots of Parts. New to hitches? Start with the buying guide, how to choose a hitch, and receiver size guide. Prefer the full index? Open the towing guides hub.

Watch these CURT videos first

All four videos are from the official CURT YouTube channel (@curtmfg). There is no dedicated Durango install clip on the channel for the SKUs we stock today, so these selection, technique, ball-mount, and wiring videos cover the habits you still need before you buy.

If an embed does not load, use the YouTube link under the card.

How to Select a Hitch

CURT · Class and receiver size

Quick primer on hitch classes so you can tell a Class 3 Durango receiver from a lighter accessory hitch before you order.

Watch on YouTube →

CURT Install Techniques

CURT · Hardware and method

Solid habits for bolting a receiver. Useful context if you are installing CURT 13072 or CURT 13297 on a 2004–2009 Durango.

Watch on YouTube →

Ball Mount and Trailer Ball

CURT · Drop, rise, ball size

Match drop or rise and ball diameter to Durango ride height and your trailer coupler once the receiver is ready.

Watch on YouTube →

Trailer Wiring Basics

CURT · T-connector habits

How a vehicle-specific harness plugs in so trailer lights work. Pair with the Durango wiring SKUs listed below.

Watch on YouTube →

Durango years and hitch shopping

Think of Durango hitch shopping in two buckets. For 2004–2009 we publish year landers and stock rear Class 3 receivers. For 2011-and-newer, we do not publish dedicated hitch year pages yet — and we do not list a matching aftermarket rear Class 3 for those years in the current CURT catalogue. Many late Durangos already carry a factory receiver, so the useful next steps are often wiring, a ball mount, a brake-control harness, and an honest look under the bumper.

Years What we usually stock
2004–2009 Class 3 Rear Class 3: CURT 13072 for 2004–2009 Durango (Aspen shared on the card). Earlier overlap option: CURT 13297 for 2004–2006 Durango. Read every fitment row before you buy.
Wiring we stock Four-flat for later Durango: CURT 56336 (2014–2026 on the card). Early shared harness example: CURT 55334 — confirm Durango years on the product card because it covers several Chrysler and Dodge applications.
Brake-control harnesses Earlier Durango and Ram applications: CURT 51332. Later Grand Cherokee and Durango applications: CURT 51446. Match the year list on the card to your VIN era.
2011-and-newer No dedicated hitch year landers yet, and no rear aftermarket Class 3 for those Durangos in our current CURT catalogue. Inspect the factory receiver first. Wiring and brake harnesses above still help when your year is listed.
Pre-2004 No Durango hitch year pages published for those years. Use the trailer hitches collection and reach out if you need help matching an early Durango.

Never exceed Dodge’s tow rating for your trim, axle ratio, and tow package. A hitch rating is not permission to tow heavier than the SUV was designed for.

Jump to your Durango year

These landers are live. 2010 and 2011-and-newer Durango hitch pages are not published yet.

CURT 13072 versus 13297 in plain language

Broader 2004–2009 Class 3

CURT 13072 · 2 inch receiver

The rear Class 3 we stock across 2004–2009 Durango, with Chrysler Aspen listed on the same card for 2007–2009. Stock link: CURT 13072.

  • Two-inch receiver opening for common ball mounts
  • Confirm Aspen versus Durango rows if you own an Aspen
  • Always respect Dodge tongue and tow limits
Early overlap Class 3

CURT 13297 · 2004–2006

A second Class 3 option for early years in that generation. Stock link: CURT 13297. Compare both cards side by side if your Durango is 2004–2006.

  • Do not guess from a photo alone — read the year list
  • Finish lights with a harness that lists your Durango
  • Use the ball mount guide for drop or rise

CURT parts we stock for Durango

Real store links. Confirm year ranges and shared Chrysler applications before you buy.

Simple setup steps

Step 1Open your year

Use the 2004–2009 landers above when they exist so you see what the Durango page actually lists.

Step 2Inspect the bumper

On 2011-and-newer Durangos, look for a factory receiver before you shop a second rear hitch we do not stock.

Step 3Pick 13072 or 13297

Only for the years those cards list. Wrong year means wrong hardware.

Step 4Finish lights and brakes

Use the wiring guide and the brake controller guide when the trailer needs them.

Canada checklist

  • Believe Dodge’s tow rating for your trim, axle, and tow package — it beats any hitch brochure.
  • 2004–2009 landers are live — later years are a catalogue and lander gap we call out on purpose.
  • Factory receivers are common on newer Durangos — inspect before you hunt an aftermarket Class 3 we do not list.
  • Plan for salt season — rinse receivers and protect wiring plugs through winter. Free shipping still applies on the CURT parts above.

Related guides

More help: towing guides hub · weight distribution · pin, clip, and safety chains · contact support