Ford Econoline Trailer Hitch Buyer's Guide (Canada)

CURT hitches for the Ford Econoline

A hitch turns your Econoline into the one that takes a bike rack, a cargo carrier, a utility trailer or a small boat. CURT builds four hitches for the Ford Econoline from 1975 to 2002, Class 3, rated 5,000 lb to 10,000 lb, from $279.13 CAD with free shipping anywhere in Canada.

Your year decides the part. Find it in the table, open the year page for the exact hitch, price and wiring, and you're done in a few minutes.

CURT 14053 trailer hitch
Newest fitCURT 14053Class 3, 2-inch receiver, 10,000 lb / 1,000 lb tongue
1975 through 2002 E-150 Econoline
$621.60 CADSee the hitch →

Which hitch fits your Econoline, by year

Years Hitch Class, receiver, rating Price
1975 through 2002 E-150 Econoline
1975 through 2002 E-250 Econoline
1975 through 2002 E-150 Econoline Club Wagon
1975 through 1991 E-250 Econoline Club Wagon
1977 through 2002 E-350 Econoline Club Wagon
1975 through 2000 E-350 Econoline
1975 through 1983 E-100 Econoline Club Wagon
1975 through 1983 E-100 Econoline
CURT 14053 Class 3, 2-inch receiver, 10,000 lb / 1,000 lb tongue $621.60 CAD
2000 through 2002 E-150 Econoline
2000 through 2002 E-250 Econoline
CURT 13055 Class 3, 2-inch receiver, 6,000 lb / 600 lb tongue $279.13 CAD
1975 through 2002 E-150 Econoline
1975 through 2002 E-250 Econoline
1975 through 2002 E-150 Econoline Club Wagon
1975 through 1991 E-250 Econoline Club Wagon
1977 through 2002 E-350 Econoline Club Wagon
1975 through 1998 E-350 Econoline
1975 through 1983 E-100 Econoline Club Wagon
1975 through 1983 E-100 Econoline
1975 and 1992 Econoline Van
CURT 13053 Class 3, 2-inch receiver, 5,000 lb / 500 lb tongue $479.14 CAD
2000 E-150 Econoline
2000 E-250 Econoline
CURT 14055 Class 3, 2-inch receiver, 10,000 lb / 1,000 lb tongue $419.84 CAD

Pick your Econoline year

Each year page has the hitch, the harness and the ball mount that go together, with the price of each.

CURT parts for the Ford Econoline

Wiring, ball mount and the rest

A bike rack needs nothing but the hitch. A trailer needs lights, and CURT 55344 ($62.08 CAD) is the four-flat harness that plugs into the Econoline's factory connector for 1995 through 2003. No cutting, no scotch-locks. Other years have their own harness; the year page shows the right one.

Then a ball mount sized to the receiver: CURT 45836 ($41.70 CAD) drops straight into a 2-inch receiver. Pick the drop or rise that keeps the trailer level, and match the ball to the coupler. The ball mount guide covers both in two minutes.

Canadian winters eat hitch hardware. Salt and brine get into the receiver and the trailer plug, so a smear of grease on the pin, a cap on the receiver and a rinse under the bumper in spring keep a CURT hitch looking new for years. The rust and salt care guide has the full routine.

Ford Econoline hitch questions

Which CURT hitch fits my Ford Econoline?

It depends on the year. CURT 14053 is the newest, for 1975 through 2002, and the table above matches every other year to its part. Open your year page and the exact hitch, price and wiring are on it.

Can I put a bike rack on an Econoline with this hitch?

Yes. The 2-inch receiver takes any 2-inch rack, and a loaded rack counts against the hitch's tongue weight (1,000 lb on CURT 14053), so a four-bike platform rack with bikes on it is well inside the limit.

Can I install the hitch myself?

CURT rates CURT 14053 advanced, about 60 minutes, so expect some trim or drilling work. The install video above is the real job, uncut.

How much can an Econoline tow with a CURT hitch?

The hitch is rated from 5,000 lb to 10,000 lb depending on the part, but the Econoline's own tow rating in the owner's manual is the ceiling. The lower of the two numbers is your limit, every time.

Related guides

More for this vehicle

    Shop the category

    All towing & hitch guides →