2008 Mercury Sable Trailer Hitch
The hitch that fits, the harness that plugs in, shipped free anywhere in Canada
Every part below is matched to the 2008 Mercury Sable, priced in Canadian dollars, and on its way to your door with no shipping charge.
CURT parts for the 2008 Mercury Sable
A Class 3 hitch puts a bike rack, a cargo carrier, a utility trailer or a small boat behind your 2008 Mercury Sable. CURT 13542 is a Class 3 hitch with a 2-inch receiver, rated to 3,500 lb gross trailer weight and 350 lb tongue weight, $346.69 CAD. Shipping is free anywhere in Canada.
CURT calls the install a novice job, about 30 minutes with hand tools, and the main body tucks up behind the bumper so only the receiver shows.
A hitch is the receiver only. If you're pulling a trailer you'll need a wiring harness for the brake and turn signals, and the wiring guide walks you through four-flat and seven-way.
What you need to tow with a 2008 Mercury Sable
A bike rack only needs the hitch. A trailer needs all three, and every piece ships free anywhere in Canada.
- CURT 13542 hitch, $346.69 CAD. The receiver that bolts to the Sable.
- Wiring harness. Needed for any trailer with lights; pick four-flat or seven-way in the wiring guide.
- CURT 45836 ball mount, $41.70 CAD. Ball mount with the ball already on it, ready to hook a trailer. Bigger coupler? CURT 45041 carries a 2-5/16-inch ball, $62.42 CAD.
More Mercury Sable hitch years
2008 Mercury Sable hitch questions
Which trailer hitch fits a 2008 Mercury Sable?
CURT 13542 is a Class 3 hitch with a 2-inch receiver, rated to 3,500 lb gross trailer weight and 350 lb tongue weight.
How much can a 2008 Mercury Sable tow with this hitch?
The hitch is rated to 3,500 lb gross trailer weight and 350 lb tongue weight, or 4,000 lb with a weight-distribution hitch. Your Sable has its own tow rating in the owner's manual, and the lower number is your limit. A loaded bike rack counts against tongue weight too.
Does the hitch come with trailer wiring?
No. The hitch is the receiver and hardware. For a bike rack you don't need wiring at all; for a trailer you need a harness, and the wiring guide covers four-flat and seven-way.
