2013 Dodge Challenger Trailer Hitch
The hitch that fits, the harness that plugs in, shipped free anywhere in Canada
Every part below is matched to the 2013 Dodge Challenger, priced in Canadian dollars, and on its way to your door with no shipping charge.
CURT parts for the 2013 Dodge Challenger
2011-2023 Chrysler 300 / 2011-2016 Dodge Challenger + Class 3 Trailer Hitch CURT 13093
$275.67
2011-2023 Dodge Challenger / 2011-2023 Dodge Charger + Class 3 Trailer Hitch CURT 13236
$305.71
CURT 12064 CLASS 2 HITCH 11-23 CHALLENGER/ 11-17 300C/12-23 300S CURT 12064
$273.75
CURT 55534 4-FLAT WIRE HARNESS 05-10 300/ 08-14 CHALLENGER/ 06-10 CHARGER CURT 55534
$77.63Your 2013 Dodge Challenger has three CURT hitches to choose from, and the right one comes down to what you're pulling and what you'll hang off the receiver. CURT 13093 is a Class 3 hitch with a 2-inch receiver, rated to 3,500 lb gross trailer weight and 350 lb tongue weight, $275.67 CAD. Every one ships free anywhere in Canada.
- CURT 13236 is a Class 3 hitch with a 2-inch receiver, rated to 3,500 lb gross trailer weight and 350 lb tongue weight, $305.71 CAD. It doesn't fit the Demon/hellcat/srt trim.
- CURT 12064 is a Class 1 hitch with a 1-1/4 inch receiver, rated to 3,500 lb gross trailer weight and 350 lb tongue weight, $273.75 CAD.
Trailer lights are a plug-in job on this one. CURT 55534 is the four-flat plug harness for the 2013 Dodge Challenger, $77.63 CAD, and it clicks into the factory connector so you're not splicing wires behind the bumper.
What you need to tow with a 2013 Dodge Challenger
A bike rack only needs the hitch. A trailer needs all three, and every piece ships free anywhere in Canada.
- CURT 13093 hitch, $275.67 CAD. The receiver that bolts to the Challenger.
- CURT 55534 wiring harness, $77.63 CAD. Plugs in, no splicing; the trailer lights follow the Challenger's.
- CURT 45836 ball mount, $41.70 CAD. Ball mount with the ball already on it, ready to hook a trailer. Bigger coupler? CURT 45041 carries a 2-5/16-inch ball, $62.42 CAD.
More Dodge Challenger hitch years
2013 Dodge Challenger hitch questions
Which trailer hitch fits a 2013 Dodge Challenger?
CURT 13093 (Class 3, 2-inch receiver, 3,500 lb), CURT 13236 (Class 3, 2-inch receiver, 3,500 lb), and CURT 12064 (Class 1, 1-1/4 inch receiver, 3,500 lb) all fit. Pick the class that covers your trailer with room to spare, then check the fit table on the product page for your build.
How much can a 2013 Dodge Challenger tow with this hitch?
The hitch is rated to 3,500 lb gross trailer weight and 350 lb tongue weight. Your Challenger has its own tow rating in the owner's manual, and the lower number is your limit. A loaded bike rack counts against tongue weight too.
Do I need a wiring harness for the 2013 Dodge Challenger?
If a trailer is going on, yes. Brake and turn signals have to work, and CURT 55534 plugs into the factory connector so the trailer lights follow the Challenger's. Order it with the hitch and it's one install.
Will it fit my Challenger?
Nearly every build, with a few exceptions. CURT 13236 doesn't fit the Demon/hellcat/srt trim. The full fit table is on each product page, so check it before you order.
