2013 Ford Fusion Trailer Hitch
The hitch that fits, the harness that plugs in, shipped free anywhere in Canada
Every part below is matched to the 2013 Ford Fusion, priced in Canadian dollars, and on its way to your door with no shipping charge.
CURT parts for the 2013 Ford Fusion
2013-2020 Ford Fusion / 2013-2020 Lincoln Mkz Class 2 Trailer Hitch CURT 12091
$249.84
2013-2020 Ford Fusion Trailer Wiring Harness CURT 56351
$117.49A Class 1 hitch puts a bike rack or a small cargo carrier behind your 2013 Ford Fusion. CURT 12091 is a Class 1 hitch with a 1-1/4 inch receiver, rated to 3,500 lb gross trailer weight and 350 lb tongue weight, $249.84 CAD. It doesn't fit the Sport trim. Shipping is free anywhere in Canada.
CURT calls the install a novice job, about 30 minutes with hand tools, and the main body tucks up behind the bumper so only the receiver shows.
Trailer lights are a plug-in job on this one. CURT 56351 is the four-flat plug harness for the 2013 Ford Fusion, $117.49 CAD, and it clicks into the factory connector so you're not splicing wires behind the bumper.
What you need to tow with a 2013 Ford Fusion
A bike rack only needs the hitch. A trailer needs all three, and every piece ships free anywhere in Canada.
- CURT 12091 hitch, $249.84 CAD. The receiver that bolts to the Fusion.
- CURT 56351 wiring harness, $117.49 CAD. Plugs in, no splicing; the trailer lights follow the Fusion's.
- CURT 45521 ball mount, $51.38 CAD. Ball mount for a 1-1/4 inch receiver; add the trailer ball that matches your coupler.
More Ford Fusion hitch years
2013 Ford Fusion hitch questions
Which trailer hitch fits a 2013 Ford Fusion?
CURT 12091 is a Class 1 hitch with a 1-1/4 inch receiver, rated to 3,500 lb gross trailer weight and 350 lb tongue weight. It doesn't fit the Sport trim.
How much can a 2013 Ford Fusion tow with this hitch?
The hitch is rated to 3,500 lb gross trailer weight and 350 lb tongue weight. Your Fusion has its own tow rating in the owner's manual, and the lower number is your limit. A loaded bike rack counts against tongue weight too.
Do I need a wiring harness for the 2013 Ford Fusion?
If a trailer is going on, yes. Brake and turn signals have to work, and CURT 56351 plugs into the factory connector so the trailer lights follow the Fusion's. Order it with the hitch and it's one install.
Will it fit my Fusion?
Nearly every build, with a few exceptions. It doesn't fit the Sport trim. The full fit table is on each product page, so check it before you order.
