Infiniti FX45 Trailer Hitch Buyer's Guide (Canada)

Shopping a trailer hitch for an Infiniti FX45 in Canada? Start with the door-sticker tow limit on this first-generation crossover, then open the live CURT shelf we stock for listed FX45 years. CURT 13558 is the in-stock Class 3 hitch for two thousand three through two thousand seven FX45 on the live card, sharing that sheet with listed FX35 years. The hitch card rates about three thousand five hundred pounds gross trailer weight and three hundred fifty pounds tongue weight. That is honest light Class 3 hardware for bike racks, small utility trailers, and other light tows that still respect the Infiniti sticker. Door sticker first. Hitch second. Canada orders often ship free on qualifying baskets, so confirm the cart note before you check out.

Parts-counter shortcut. Start with the door sticker, open the live CURT 13558 card for your FX45 year, then plan lights before the first night tow. Broader Canada shopping help lives in our buying guide, how to choose a hitch, what hitch class do I need, and FX35 hitch guide when you want the sibling badge overview. Prefer the full index? Open the towing guides hub.

Watch these CURT videos first

All four videos are from the official CURT YouTube channel (@curtmfg). Use them for class selection, install habits, wiring basics, and ball-mount height before you dig into the product cards below.

If an embed does not load, use the YouTube link under the card.

How to Select a Trailer Hitch

CURT - Hitch class basics

Match Class 3 hardware to the door sticker and the live card before you shop a heavier trailer than the vehicle can honestly tow.

Watch on YouTube

Trailer Hitch Installation Techniques

CURT - Install habits

Confirm the live card still lists your year and configuration. Shared sheets are easy to mix up when sibling badges sit nearby.

Watch on YouTube

How to Connect a Trailer Wiring Harness

CURT - Wiring basics

Plan lights after the hitch. A four-flat or seven-way still needs a clean ground before the first night tow.

Watch on YouTube

How to Choose a Ball Mount and Trailer Ball

CURT - Ball mount height

Match shank size to the live tube, then level the trailer with rise versus drop once the hitch is on.

Watch on YouTube

The live hitch path for listed FX45 years

CURT 13558 is a Class 3 hitch with a two inch receiver path for two thousand three through two thousand seven FX45 crossovers on the live card. The same sheet also covers listed two thousand three through two thousand eight FX35 years. On the hitch card it rates about three thousand five hundred pounds gross and three hundred fifty pounds tongue. That is a modest Class 3 number, so treat the door sticker as the real ceiling even when the hitch tube looks ready for more.

We do not invent a dedicated FX45-only wiring harness promise on this shelf today. Plan a four-flat path and a clean ground after the hitch goes on. Second-generation FX50 and later Infiniti crossovers are separate shopping trips. This page stays focused on the rear receiver path for listed first-generation FX45 years.

How to shop without getting lost

Step 1Read the door sticker

Find the Infiniti tow and tongue numbers for your FX45. The hitch cannot raise that limit.

Step 2Open the live 13558 card

Confirm the title still lists your FX45 year on the shared FX35 and FX45 sheet.

Step 3Keep expectations honest

About three thousand five hundred pounds on the hitch card is light Class 3. Match the trailer to the sticker.

Step 4Confirm lights

Plan a four-flat, clean the ground, and pretest before a night tow.

Primary Class 3

13558 Class 3

Class 3 path for listed two thousand three through two thousand seven FX45 years.

  • About three thousand five hundred pounds GTW on the hitch card
  • About three hundred fifty pounds tongue on the hitch card
  • Two inch receiver on the live card
Sibling honesty

FX35 share

The live card also names FX35. Keep badge shopping honest without inventing a second stocked hitch.

  • Same Class 3 sheet for listed FX35 and FX45 years
  • Open the FX35 guide when that badge is on the driveway
  • Door sticker still wins
Light-duty mindset

Sticker ceiling

This FX45 hitch is useful for light trailers and racks, not a blank cheque for a heavy camper.

  • Match trailer weight to the Infiniti sticker
  • Level the coupler with rise versus drop
  • Pretest lights before the first night tow

Year pages that already exist

These Infiniti FX45 year landers are already live. We only link pages that return on this store.

Always confirm the live hitch card still lists your FX45 year before you order. FX35 titles can appear nearby on the same sheet without changing your door sticker.

Accessories that match the receiver

Match pins, covers, and ball mounts to the live tube size on your hitch card. Two inch Class 3 tubes share everyday inserts when the live title still names a two inch receiver.

Topic What we tell shoppers
Door sticker first A hitch is not a blank cheque. Read the Infiniti tow limit, then open hitch versus vehicle tow rating.
Primary stocked path 13558 is the live Class 3 path for listed two thousand three through two thousand seven FX45 years.
FX45 versus FX35 Same live sheet. Open the FX35 guide when that badge is on the driveway.
Light Class 3 About three thousand five hundred pounds on the hitch card means light trailers and racks, not heavy campers.
Wiring honesty No invented dedicated harness promise here. Plan lights and a clean ground after the hitch.

Related guides worth opening next

Parts-counter summary: for listed FX45 years on this store, start with live CURT 13558 Class 3, confirm the shared FX35 sheet still names your year, keep trailer weight honest against the Infiniti sticker, and only trust year landers that already return here.