Jeep Liberty Trailer Hitch Buyer’s Guide (Canada)
A hitch turns your Liberty into the one that takes a bike rack, a cargo carrier, a utility trailer or a small boat. CURT builds three hitches for the Jeep Liberty from 2002 to 2012, Class 2 to Class 3, rated 3,500 lb to 5,000 lb, from $216.63 CAD with free shipping anywhere in Canada.
Your year decides the part. Find it in the table, open the year page for the exact hitch, price and wiring, and you're done in a few minutes.
2008 through 2012 Liberty$333.84 CADSee the hitch →
Which hitch fits your Liberty, by year
| Years | Hitch | Class, receiver, rating | Price | |
|---|---|---|---|---|
 |
2008 through 2012 Liberty | CURT 13245 | Class 3, 2-inch receiver, 5,000 lb / 500 lb tongue | $333.84 CAD |
 |
2008 through 2012 Liberty | CURT 12245 | Class 2, 1-1/4 inch receiver, 3,500 lb / 350 lb tongue | $216.63 CAD |
 |
2002 through 2007 Liberty | CURT 13044 | Class 3, 2-inch receiver, 5,000 lb / 500 lb tongue | $318.69 CAD |
Pick your Liberty year
Each year page has the hitch, the harness and the ball mount that go together, with the price of each.
Class 2 or Class 3 on a Liberty?
Class 2 is the lighter one, with a 1-1/4 inch receiver and 3,500 lb of trailer. It's plenty for a bike rack, a cargo carrier or a light utility trailer. Class 3 moves you to a 2-inch receiver and 5,000 lb, which is what you want for a bike rack, a cargo carrier, a utility trailer or a small boat, and it takes the common 2-inch racks and carriers without an adapter. Either way the Liberty's own tow rating in the owner's manual is the ceiling, and the lower number wins.
CURT parts for the Jeep Liberty
Wiring, ball mount and the rest
A bike rack needs nothing but the hitch. A trailer needs lights, and CURT 55381 ($54.86 CAD) is the four-flat harness that plugs into the Liberty's factory connector for 2005 through 2008. No cutting, no scotch-locks. Other years have their own harness; the year page shows the right one.
Then a ball mount sized to the receiver: CURT 45836 ($41.70 CAD) drops straight into a 2-inch receiver. Pick the drop or rise that keeps the trailer level, and match the ball to the coupler. The ball mount guide covers both in two minutes.
Canadian winters eat hitch hardware. Salt and brine get into the receiver and the trailer plug, so a smear of grease on the pin, a cap on the receiver and a rinse under the bumper in spring keep a CURT hitch looking new for years. The rust and salt care guide has the full routine.
Jeep Liberty hitch questions
Which CURT hitch fits my Jeep Liberty?
It depends on the year. CURT 13245 is the newest, for 2008 through 2012, and the table above matches every other year to its part. Open your year page and the exact hitch, price and wiring are on it.
Can I put a bike rack on a Liberty with this hitch?
Yes. The 2-inch receiver takes any 2-inch rack, and a loaded rack counts against the hitch's tongue weight (500 lb on CURT 13245), so a four-bike platform rack with bikes on it is well inside the limit.
Can I install the hitch myself?
Most owners do. CURT rates CURT 13245 a novice install, about 30 minutes with hand tools and a jack. The install video above is the real job, uncut.
How much can a Liberty tow with a CURT hitch?
The hitch is rated from 3,500 lb to 5,000 lb depending on the part, but the Liberty's own tow rating in the owner's manual is the ceiling. The lower of the two numbers is your limit, every time.
