Kia Sedona Trailer Hitch Buyer’s Guide (Canada)
A hitch turns your Sedona into the one that takes a bike rack, a cargo carrier, a utility trailer or a small boat. CURT builds three hitches for the Kia Sedona from 2002 to 2021, Class 3, rated 3,500 lb to 4,000 lb, from $333.84 CAD with free shipping anywhere in Canada.
Your year decides the part. Find it in the table, open the year page for the exact hitch, price and wiring, and you're done in a few minutes.
2015 through 2021 Sedona$333.84 CADSee the hitch →
Which hitch fits your Sedona, by year
| Years | Hitch | Class, receiver, rating | Price | |
|---|---|---|---|---|
 |
2015 through 2021 Sedona | CURT 13115 | Class 3, 2-inch receiver, 4,000 lb / 400 lb tongue | $333.84 CAD |
 |
2006 through 2012 and 2014 Sedona |
CURT 13345 06-10 119 Wheel Base Only only |
Class 3, 2-inch receiver, 3,500 lb / 350 lb tongue | $376.78 CAD |
 |
2002 through 2004 Sedona | CURT 13340 | Class 3, 2-inch receiver, 3,500 lb / 300 lb tongue | $526.63 CAD |
Pick your Sedona year
Each year page has the hitch, the harness and the ball mount that go together, with the price of each.
CURT parts for the Kia Sedona
Wiring, ball mount and the rest
A bike rack needs nothing but the hitch. A trailer needs lights, and CURT 56332 ($88.90 CAD) is the four-flat harness that plugs into the Sedona's factory connector for 2015 through 2021. No cutting, no scotch-locks. Other years have their own harness; the year page shows the right one.
Then a ball mount sized to the receiver: CURT 45836 ($41.70 CAD) drops straight into a 2-inch receiver. Pick the drop or rise that keeps the trailer level, and match the ball to the coupler. The ball mount guide covers both in two minutes.
Canadian winters eat hitch hardware. Salt and brine get into the receiver and the trailer plug, so a smear of grease on the pin, a cap on the receiver and a rinse under the bumper in spring keep a CURT hitch looking new for years. The rust and salt care guide has the full routine.
Kia Sedona hitch questions
Which CURT hitch fits my Kia Sedona?
It depends on the year. CURT 13115 is the newest, for 2015 through 2021, and the table above matches every other year to its part. Open your year page and the exact hitch, price and wiring are on it.
Can I put a bike rack on a Sedona with this hitch?
Yes. The 2-inch receiver takes any 2-inch rack, and a loaded rack counts against the hitch's tongue weight (400 lb on CURT 13115), so a four-bike platform rack with bikes on it is well inside the limit.
Can I install the hitch myself?
Most owners do. CURT rates CURT 13115 a novice install, about 45 minutes with hand tools and a jack. The install video above is the real job, uncut.
How much can a Sedona tow with a CURT hitch?
The hitch is rated from 3,500 lb to 4,000 lb depending on the part, but the Sedona's own tow rating in the owner's manual is the ceiling. The lower of the two numbers is your limit, every time.
