Kia Telluride Trailer Hitch Buyer’s Guide (Canada)

CURT hitches for the Kia Telluride

A hitch turns your Telluride into the one that takes a bike rack, a cargo carrier, a utility trailer or a small boat. CURT builds two hitches for the Kia Telluride from 2020 to 2027, Class 3, rated 5,000 lb to 5,000 lb, from $342.22 CAD with free shipping anywhere in Canada.

Your year decides the part. Find it in the table, open the year page for the exact hitch, price and wiring, and you're done in a few minutes.

CURT 13648 trailer hitch
Newest fitCURT 13648Class 3, 2-inch receiver
2027 Telluride
$342.22 CADSee the hitch →

Which hitch fits your Telluride, by year

Years Hitch Class, receiver, rating Price
2027 Telluride CURT 13648 Class 3, 2-inch receiver $342.22 CAD
2020 through 2025 Telluride CURT 13420 Class 3, 2-inch receiver, 5,000 lb / 750 lb tongue $366.07 CAD

Pick your Telluride year

Each year page has the hitch, the harness and the ball mount that go together, with the price of each.

CURT parts for the Kia Telluride

Watch a Telluride hitch go on

CURT's own install crew, start to finish, so you know what you're in for before the box arrives.

How to Trim Fascia · Watch on YouTube
Wiring Install · Watch on YouTube

Wiring, ball mount and the rest

A bike rack needs nothing but the hitch. A trailer needs lights, and CURT 56466 ($130.05 CAD) is the seven-way harness that plugs into the Telluride's factory connector for 2020 through 2022. No cutting, no scotch-locks. Other years have their own harness; the year page shows the right one.

Then a ball mount sized to the receiver: CURT 45836 ($41.70 CAD) drops straight into a 2-inch receiver. Pick the drop or rise that keeps the trailer level, and match the ball to the coupler. The ball mount guide covers both in two minutes.

Canadian winters eat hitch hardware. Salt and brine get into the receiver and the trailer plug, so a smear of grease on the pin, a cap on the receiver and a rinse under the bumper in spring keep a CURT hitch looking new for years. The rust and salt care guide has the full routine.

Kia Telluride hitch questions

Which CURT hitch fits my Kia Telluride?

It depends on the year. CURT 13648 is the newest, for 2027, and the table above matches every other year to its part. Open your year page and the exact hitch, price and wiring are on it.

Can I put a bike rack on a Telluride with this hitch?

Yes. The 2-inch receiver takes any 2-inch rack, and a loaded rack counts against the hitch's tongue weight, so a four-bike platform rack with bikes on it is well inside the limit.

How much can a Telluride tow with a CURT hitch?

The hitch is rated from 5,000 lb to 5,000 lb depending on the part, but the Telluride's own tow rating in the owner's manual is the ceiling. The lower of the two numbers is your limit, every time.

Related guides

More for this vehicle

Shop the category

All towing & hitch guides →