Mitsubishi Endeavor Trailer Hitch Buyer's Guide (Canada)

Shopping a trailer hitch for a Mitsubishi Endeavor in Canada? Start with the door-sticker tow limit, then open the live CURT 13113 Class 3 card. That hitch is dedicated to listed two thousand six through two thousand eleven Endeavor years with a two inch receiver, about three thousand five hundred pounds gross trailer weight, and about three hundred fifty pounds tongue weight on the hitch card, plus a weight-distribution note around five thousand pounds when you run a proper weight-distribution setup.

Built for Canadian Endeavor owners and shops. Free shipping on CURT towing gear from Lots of Parts when the SKU is live on this store. New to hitch shopping? Start with the buying guide, how to choose a hitch, hitch for bike rack only, and hitch bolt torque tips. Prefer the full index? Open the towing guides hub.

Watch these CURT videos first

All four videos are from the official CURT YouTube channel (@curtmfg). Use them for class selection, install habits, wiring basics, and ball-mount height before you dig into the product cards below.

If an embed does not load, use the YouTube link under the card.

How to Select a Trailer Hitch

CURT - Hitch class basics

Match Class 3 to the Endeavor door sticker and the live 13113 rating before you shop a heavier trailer.

Watch on YouTube

Trailer Hitch Installation Techniques

CURT - Install habits

Confirm the install sheet for the listed Endeavor years, then recheck torque after salted Canadian winters.

Watch on YouTube

How to Connect a Trailer Wiring Harness

CURT - Wiring basics

Plan lights after the hitch. We do not invent an Endeavor harness SKU here, so confirm the plug path before you guess.

Watch on YouTube

How to Choose a Ball Mount and Trailer Ball

CURT - Ball-mount height

A two inch ball mount must level the trailer. Check rise versus drop once the hitch is on the SUV.

Watch on YouTube

What the live CURT 13113 card actually covers

CURT 13113 is a Class 3 hitch with a two inch receiver for listed two thousand six through two thousand eleven Mitsubishi Endeavor years. On the live card it is rated to about three thousand five hundred pounds gross trailer weight and three hundred fifty pounds tongue weight, with a weight-distribution note around five thousand pounds when you run a proper weight-distribution setup.

Those numbers are hitch ratings, not a promise that every Endeavor trim can tow that much. Door sticker first. Hitch second. This is a dedicated Endeavor shelf, not a shared Outlander or Outlander Sport card.

CURT 13113 Class 3

Dedicated two inch Class 3 for listed two thousand six through two thousand eleven Endeavor years. Confirm year and ratings on the live card.

Open live 13113 product →

Parts-counter note. Prefer 13113 when the SUV is an Endeavor. Outlander shopping stays on the Outlander hitch buyer guide.

Hitch versus vehicle tow rating

Weight distribution hitch guide

How to shop without getting lost

Step 1Read the door sticker

Find the Mitsubishi tow and tongue numbers for your Endeavor. The hitch cannot raise that limit.

Step 2Open live 13113

Confirm your Endeavor year is listed, then note Class 3, two inch tube, and the hitch ratings.

Step 3Plan lights

We do not stock a dedicated Endeavor harness on this shelf today. Confirm a harness path before you order lights.

Step 4Match accessories

Two inch cover, five-eighths pin or lock, ball mount height, then a first-tow walk-around.

Receiver

Two inch Class 3

13113 gives a two inch opening. Bike racks, cargo boxes, and ball mounts must match that tube size.

  • About three thousand five hundred pounds GTW on the hitch card
  • About three hundred fifty pounds tongue on the hitch card
  • Weight-distribution note around five thousand pounds on the live card
Fitment honesty

Endeavor-only shelf

13113 is dedicated to Endeavor. Do not force an Outlander or Sport path onto this card.

Wiring

Confirm-first lights

No live dedicated Endeavor CURT harness shows on this shelf today. Treat wiring as confirm-first.

Year pages that already exist

These year landers are already live for the Endeavor years on the 13113 card.

Always confirm the live hitch card still lists your year before you order.

Accessories that match the receiver

Keep the tube covered when empty, pin what you insert, and quiet chatter with an anti-rattle kit sized for two inch. Ball mounts must match that opening.

CoverCURT 22272Two inch receiver cover for empty-tube days. PinCURT 21500Five-eighths hitch pin with clip for everyday two inch inserts. Quiet kitCURT 22321Anti-rattle kit sized for a two inch tube. Ball mountCURT 45036Two inch ball mount with useful drop or rise options. Confirm the live card before you tow. Receiver lockCURT 23515Hitch lock sized for a two inch receiver when you want more than a plain pin.
Topic What we tell shoppers
Door sticker first A hitch is not a blank cheque. Read the Mitsubishi tow limit, then open hitch versus vehicle tow rating.
Which Class 3 Start on dedicated 13113 for listed Endeavor years.
Wiring honesty No dedicated Endeavor harness on this shelf today. Confirm before you guess.
Bike rack reality Some Endeavor owners only want bikes or a cargo box. Open hitch for bike rack only.
Receiver size Match accessories to the two inch opening. See the receiver size guide.

Related guides worth opening next

Rise versus dropLevel the trailer after the hitch is on. Hitch ball nut torqueTorque the ball nut to the maker spec, then recheck. First tow checklistLights, chains, coupler, and tire pressure habits. Trailer ball sizeMatch the coupler before you pick a chrome ball.

Parts-counter summary: match listed two thousand six through two thousand eleven Endeavor years to dedicated 13113, respect the Mitsubishi door sticker under the hitch rating, keep Outlander shopping separate, and treat wiring as confirm-first. Free shipping on live CURT towing gear from Lots of Parts across Canada when the SKU shows available on this store.