Mitsubishi Outlander Sport Trailer Hitch Buyer’s Guide (Canada)
A hitch turns your Outlander Sport into the one that takes a bike rack, a cargo carrier, a utility trailer or a small boat. CURT builds two hitches for the Mitsubishi Outlander Sport from 2011 to 2026, Class 1 to Class 3, rated 3,500 lb to 3,500 lb, from $266.26 CAD with free shipping anywhere in Canada.
Your year decides the part. Find it in the table, open the year page for the exact hitch, price and wiring, and you're done in a few minutes.
2011 through 2026 Outlander Sport$266.26 CADSee the hitch →
Which hitch fits your Outlander Sport, by year
| Years | Hitch | Class, receiver, rating | Price | |
|---|---|---|---|---|
 |
2011 through 2026 Outlander Sport | CURT 13079 | Class 3, 2-inch receiver, 3,500 lb / 350 lb tongue | $266.26 CAD |
 |
2011 through 2026 Outlander Sport | CURT 12048 | Class 1, 1-1/4 inch receiver, 3,500 lb / 350 lb tongue | $274.95 CAD |
Pick your Outlander Sport year
Each year page has the hitch, the harness and the ball mount that go together, with the price of each.
Class 1 or Class 3 on an Outlander Sport?
Class 1 is the lighter one, with a 1-1/4 inch receiver and 3,500 lb of trailer. It's plenty for a bike rack or a small cargo carrier. Class 3 moves you to a 2-inch receiver and 3,500 lb, which is what you want for a bike rack, a cargo carrier, a utility trailer or a small boat, and it takes the common 2-inch racks and carriers without an adapter. Either way the Outlander Sport's own tow rating in the owner's manual is the ceiling, and the lower number wins.
CURT parts for the Mitsubishi Outlander Sport
Wiring, ball mount and the rest
A bike rack needs nothing but the hitch. A trailer needs lights, and CURT 56127 ($98.98 CAD) is the four-flat harness that plugs into the Outlander Sport's factory connector for 2011 through 2019. No cutting, no scotch-locks. Other years have their own harness; the year page shows the right one.
Then a ball mount sized to the receiver: CURT 45836 ($41.70 CAD) drops straight into a 2-inch receiver. Pick the drop or rise that keeps the trailer level, and match the ball to the coupler. The ball mount guide covers both in two minutes.
Canadian winters eat hitch hardware. Salt and brine get into the receiver and the trailer plug, so a smear of grease on the pin, a cap on the receiver and a rinse under the bumper in spring keep a CURT hitch looking new for years. The rust and salt care guide has the full routine.
Mitsubishi Outlander Sport hitch questions
Which CURT hitch fits my Mitsubishi Outlander Sport?
It depends on the year. CURT 13079 is the newest, for 2011 through 2026, and the table above matches every other year to its part. Open your year page and the exact hitch, price and wiring are on it.
Can I put a bike rack on an Outlander Sport with this hitch?
Yes. The 2-inch receiver takes any 2-inch rack, and a loaded rack counts against the hitch's tongue weight (350 lb on CURT 13079), so a four-bike platform rack with bikes on it is well inside the limit.
Can I install the hitch myself?
Most owners do. CURT rates CURT 13079 a novice install, about 30 minutes with hand tools and a jack. The install video above is the real job, uncut.
How much can an Outlander Sport tow with a CURT hitch?
The hitch is rated from 3,500 lb to 3,500 lb depending on the part, but the Outlander Sport's own tow rating in the owner's manual is the ceiling. The lower of the two numbers is your limit, every time.
