How to Select a Trailer Hitch
CURT’s selection overview before you compare Ascent receivers, tongue-weight limits, and trailer weight.
Watch on YouTube →Shopping a trailer hitch for a Subaru Ascent in Canada? This guide compares the two Class 3 receivers we stock, links every live year page from 2019 through 2026, and stays honest about fascia work and tongue-weight differences.
All four videos are from the official CURT YouTube channel (@curtmfg). There is no dedicated Ascent rear-hitch install on the channel right now. Many Ascent installs involve bumper-cover work, so the fascia trim video is useful context — still follow the CURT sheet for CURT 13400 or CURT 13448 on your exact year.
If an embed does not load, use the YouTube link under the card.
CURT’s selection overview before you compare Ascent receivers, tongue-weight limits, and trailer weight.
Watch on YouTube →Technique video when you install CURT 13400 or CURT 13448 on an Ascent.
Watch on YouTube →Honest fascia context for vehicles that need bumper-cover access. Confirm your Ascent sheet before you cut anything.
Watch on YouTube →Useful if you choose CURT 13448 and your trailer needs weight distribution within Subaru’s limits.
Watch on YouTube →Lots of Parts publishes Ascent hitch year pages for 2019 through 2026. We stock two Class 3 rear receivers for listed Ascent years: CURT 13400 and CURT 13448. Both use a 2-inch receiver opening. The practical difference shoppers ask about is tongue weight and weight-distribution compatibility.
| Choice | What we usually stock |
|---|---|
| CURT 13400 | Class 3 rear for listed 2019–2026 Ascent years: CURT 13400. Typical CURT ratings on that card are about 5,000 lb trailer and 675 lb tongue. Weight-distribution compatibility is not listed the same way as 13448 — read the product card carefully. |
| CURT 13448 | Class 3 rear for listed 2019–2026 Ascent years: CURT 13448. Typical CURT ratings on that card are about 5,000 lb trailer and 750 lb tongue, with weight-distribution figures listed on the sheet. |
| Wiring | CURT 56040 — custom 4-flat that also covers many other Subaru applications. Confirm Ascent years on the card. |
| Do not assume | CURT 11465 is a Class 1 hitch aimed at other Subaru models. Do not treat it as an Ascent Class 3 swap even if search results mix the names. |
Never exceed Subaru’s tow rating for your engine, drivetrain, and tow package. A hitch does not raise the vehicle limit.
These are live fitment pages on Lots of Parts.
Solid Class 3 path when your trailer stays within the lower tongue-weight figure and you do not need a weight-distribution setup.
Choose this when you want the higher tongue-weight figure and listed weight-distribution compatibility — still within Subaru’s limits.
Real store links. Confirm your year and notes before you buy.
Use the year links above so you see fitment notes for your Ascent.
Match tongue weight and whether you need weight distribution.
Most trailers need a harness. See the wiring guide.
Use a pin or lock. Tips in the lock and safety guide.
Browse CURT receivers with free shipping across Canada.
Open trailer hitches →Finish the job after the hitch is chosen.
Ball mounts →More help: towing guides hub · how to choose a hitch · contact support