Subaru Tribeca Trailer Hitch Buyer's Guide (Canada)

Shopping a trailer hitch for a Subaru Tribeca in Canada? Start with the door-sticker year, then open the live CURT 13046 Class 3 card. That hitch covers listed 2006 through 2007 B9 Tribeca years and listed 2008 through 2010 Tribeca years on a two inch receiver, with about three thousand five hundred pounds gross trailer weight and three hundred fifty pounds tongue weight on the hitch card. The main body is concealed for a cleaner look under the bumper. Read the Subaru tow limit before you treat the Class 3 stamp as a blank cheque for bikes, a cargo box, or a light weekend trailer.

Built for Canadian Tribeca owners and shops. Free shipping on CURT towing gear from Lots of Parts when the SKU is live on this store. New to hitch shopping? Start with the buying guide, how to choose a hitch, Outback hitch guide, and hitch for bike rack only. Prefer the full index? Open the towing guides hub.

Watch these CURT videos first

All four videos are from the official CURT YouTube channel (@curtmfg). Use them for class selection, install habits, wiring basics, and ball-mount height before you dig into the product cards below.

If an embed does not load, use the YouTube link under the card.

How to Select a Trailer Hitch

CURT · Hitch class basics

Class 3 on a Tribeca still sits under the Subaru door sticker. Match both numbers before you shop a trailer.

Watch on YouTube

Trailer Hitch Installation Techniques

CURT · Install habits

CURT lists novice install about thirty minutes on the 13046 card. Confirm the concealed-body install sheet before you start.

Watch on YouTube

How to Connect a Trailer Wiring Harness

CURT · Wiring basics

Plan lights after the hitch. Use a vehicle-specific harness path or converter when the Tribeca does not already have the plug you need.

Watch on YouTube

How to Choose a Ball Mount and Trailer Ball

CURT · Ball-mount height

A two inch ball mount must level the trailer. Check rise versus drop once the hitch is on the vehicle.

Watch on YouTube

What the live CURT 13046 card actually covers

CURT 13046 is a Class 3 hitch with a two inch receiver. On the live card it is rated to about three thousand five hundred pounds gross trailer weight and three hundred fifty pounds tongue weight, and it notes weight-distribution compatibility at about four thousand pounds with four hundred pounds tongue weight when you run a proper weight-distribution setup. Installation is listed as novice with about thirty minutes on the card. The concealed main body is meant to sit cleaner under the Tribeca bumper than an exposed cross-tube look.

Fitment on the live card includes listed 2006 through 2007 Subaru B9 Tribeca years and listed 2008 through 2010 Subaru Tribeca years. Early badges say B9 Tribeca. Later badges drop the B9. Same hitch shelf either way, as long as the year is listed.

How to shop a Tribeca hitch without getting lost

Step 1Read the door sticker

Find the Subaru tow and tongue numbers for your trim. The hitch cannot raise that limit.

Step 2Open live 13046

Confirm B9 Tribeca or Tribeca year is listed, then note Class 3 and the two inch tube.

Step 3Plan lights

Decide harness versus converter after you know what plug the trailer needs.

Step 4Match accessories

Two inch cover, five-eighths pin or lock, ball mount height, then a first-tow walk-around.

Receiver

Two inch Class 3

13046 gives a two inch opening with a concealed main body. Bike racks, cargo boxes, and ball mounts must match that tube size.

  • About three thousand five hundred pounds GTW on the hitch card
  • About three hundred fifty pounds tongue on the hitch card
  • Weight-distribution note on the live card
Badge years

B9 Tribeca versus Tribeca

2006 and 2007 wear the B9 Tribeca name. 2008 through 2010 drop the B9. Both land on 13046 when the year is listed.

  • Use the matching year lander below
  • Keep Outback and Forester on their own guides
  • Do not invent a second Tribeca hitch SKU here
Install

Novice about thirty minutes

CURT lists novice difficulty and about thirty minutes on 13046. Recheck hardware after winter salt and gravel trips.

Year pages that already exist for Tribeca

These year landers are already live. Use them when you want a year-first path into the same hitch shelf.

Tribeca production wrapped after 2010 in this catalogue path. Later Subaru crossovers stay on Outback, Forester, and Ascent guides.

Accessories that match a two inch Tribeca receiver

Keep the tube covered when empty, pin what you insert, and quiet chatter with an anti-rattle kit sized for two inch. Ball mounts must match that opening. If you need rise instead of drop to level a low trailer, open the rise versus drop guide after you pick the shank size.

Topic What we tell shoppers
Door sticker first A hitch is not a blank cheque. Read the Subaru tow limit, then open hitch versus vehicle tow rating.
Other Subarus Keep Outback and Forester on their own guides: Outback hitch guide and Forester hitch guide.
Bike rack reality Plenty of Tribeca owners only want bikes or a cargo box. Open hitch for bike rack only.
Wiring path Start with the wiring harness guide, then trailer light converter tips if turn signals need help.
Receiver size Match accessories to the two inch opening. See the receiver size guide.

Related guides worth opening next

Parts-counter summary: match the listed B9 Tribeca or Tribeca year to 13046, respect the Subaru door sticker under the hitch rating, keep Outback and Forester on their own guides, and never let hitch tube looks outvote the sticker. Free shipping on live CURT towing gear from Lots of Parts across Canada when the SKU shows available on this store.