Toyota Sienna Trailer Hitch Buyer’s Guide (Canada)
A hitch turns your Sienna into the one that takes a bike rack, a cargo carrier, a utility trailer or a small boat. CURT builds five hitches for the Toyota Sienna from 1998 to 2026, Class 1 to Class 3, rated 3,500 lb to 3,500 lb, from $281.06 CAD with free shipping anywhere in Canada.
Your year decides the part. Find it in the table, open the year page for the exact hitch, price and wiring, and you're done in a few minutes.
2021 through 2026 Sienna$281.06 CADSee the hitch →
Which hitch fits your Sienna, by year
| Years | Hitch | Class, receiver, rating | Price | |
|---|---|---|---|---|
 |
2021 through 2026 Sienna | CURT 13470 | Class 3, 2-inch receiver, 3,500 lb / 350 lb tongue | $396.73 CAD |
 |
2011 through 2020 Sienna |
CURT 13343 not SE |
Class 3, 2-inch receiver, 3,500 lb / 525 lb tongue | $289.76 CAD |
 |
2004 through 2020 Sienna |
CURT 12065 not SE |
Class 1, 1-1/4 inch receiver, 3,500 lb / 350 lb tongue | $342.57 CAD |
 |
2004 through 2020 Sienna |
CURT 13105 not SE |
Class 3, 2-inch receiver, 3,500 lb / 350 lb tongue | $282.12 CAD |
 |
1998 through 1999 and 2001 through 2003 Sienna | CURT 13511 | Class 3, 2-inch receiver, 3,500 lb / 350 lb tongue | $479.14 CAD |
Pick your Sienna year
Each year page has the hitch, the harness and the ball mount that go together, with the price of each.
Class 1 or Class 3 on a Sienna?
Class 1 is the lighter one, with a 1-1/4 inch receiver and 3,500 lb of trailer. It's plenty for a bike rack or a small cargo carrier. Class 3 moves you to a 2-inch receiver and 3,500 lb, which is what you want for a bike rack, a cargo carrier, a utility trailer or a small boat, and it takes the common 2-inch racks and carriers without an adapter. Either way the Sienna's own tow rating in the owner's manual is the ceiling, and the lower number wins.
CURT parts for the Toyota Sienna
Watch a Sienna hitch go on
CURT's own install crew, start to finish, so you know what you're in for before the box arrives.
Wiring, ball mount and the rest
A bike rack needs nothing but the hitch. A trailer needs lights, and CURT 55418 ($82.06 CAD) is the four-flat harness that plugs into the Sienna's factory connector for 1998 through 1999 and 2001 through 2003. No cutting, no scotch-locks. Other years have their own harness; the year page shows the right one.
Then a ball mount sized to the receiver: CURT 45836 ($41.70 CAD) drops straight into a 2-inch receiver. Pick the drop or rise that keeps the trailer level, and match the ball to the coupler. The ball mount guide covers both in two minutes.
Canadian winters eat hitch hardware. Salt and brine get into the receiver and the trailer plug, so a smear of grease on the pin, a cap on the receiver and a rinse under the bumper in spring keep a CURT hitch looking new for years. The rust and salt care guide has the full routine.
Toyota Sienna hitch questions
Which CURT hitch fits my Toyota Sienna?
It depends on the year. CURT 13470 is the newest, for 2021 through 2026, and the table above matches every other year to its part. Open your year page and the exact hitch, price and wiring are on it.
Can I put a bike rack on a Sienna with this hitch?
Yes. The 2-inch receiver takes any 2-inch rack, and a loaded rack counts against the hitch's tongue weight (350 lb on CURT 13470), so a four-bike platform rack with bikes on it is well inside the limit.
Can I install the hitch myself?
Most owners do. CURT rates CURT 13470 a novice install, about 45 minutes with hand tools and a jack. The install video above is the real job, uncut.
How much can a Sienna tow with a CURT hitch?
The hitch is rated from 3,500 lb to 3,500 lb depending on the part, but the Sienna's own tow rating in the owner's manual is the ceiling. The lower of the two numbers is your limit, every time.
