Trailer Jack Caster Wheel Tips for Canada

Moving a light trailer by hand is easier when the tongue jack rolls on a swivel caster wheel, but soft ground still prefers a wider foot pad. CURT 28115 is the marine jack with an eight inch wheel we keep in stock for that roll-around job. CURT 28321 and CURT 28324 are pipe-mount swivel jacks when you want the jack to swing up for travel, and CURT 28272 is the pin-on foot when grass, gravel, or summer asphalt needs more surface area than a narrow wheel. No invented legal cutoffs. Canada orders often ship free on qualifying baskets, so confirm the cart note before you check out.

Parts-counter shortcut. Use a caster wheel when you need to roll a light trailer into a stall, then switch to a foot pad when the ground is soft or the trailer will sit parked for a while. Related Canada help already covers jack wheel versus foot, jack foot pad tips, and tongue jack tips. Prefer the full index? Open the towing guides hub.

Watch these CURT videos first

All four videos are from the official CURT YouTube channel (@curtmfg). Use them for class selection, install habits, wiring basics, and ball-mount height before you dig into the product cards below.

If an embed does not load, use the YouTube link under the card. Focus on hitch class and secure coupling habits, then come back to jack wheel versus foot decisions for yard moves.

How to Select a Trailer Hitch

CURT - Hitch class basics

Match hitch class to the door sticker and the live card before you shop a heavier trailer than the vehicle can honestly tow.

Watch on YouTube

Trailer Hitch Installation Techniques

CURT - Install habits

Confirm the live card still lists your year and configuration. Shared sheets are easy to mix up when sibling badges sit nearby.

Watch on YouTube

How to Connect a Trailer Wiring Harness

CURT - Wiring basics

Plan lights after the hitch. A four-flat or seven-way still needs a clean ground before the first night tow.

Watch on YouTube

How to Choose a Ball Mount and Trailer Ball

CURT - Ball mount height

Match shank size to the live tube, then level the trailer with rise versus drop once the hitch is on.

Watch on YouTube

When a swivel caster wheel earns its keep

A jack with a swivel caster wheel lets you roll a light utility trailer, boat trailer, or similar tongue load across a flat shop floor or paved driveway without lifting the coupler by hand. CURT 28115 pairs a side-wind marine jack with an eight inch wheel and a swivel bracket so the assembly can swing up once the trailer is hitched. That is the parts-counter answer when the ask is “I just need to walk this trailer into the stall.”

Caster wheels still have limits. Narrow wheels dig into soft lawn, wet gravel, and hot asphalt. A parked trailer that sits for days puts constant load on a small contact patch. In those cases a wider foot pad spreads the weight and keeps the tongue from creeping. CURT 28272 is the pin-on jack foot we stock for two inch jack tubes when you want that larger pad without inventing a legal weight cutoff. Read the jack rating, the foot rating, and the trailer tongue weight together.

CURT 28115 jack with wheel

In-stock marine jack with an eight inch wheel for rolling a light trailer by hand, side-wind handle, and a swivel bracket that swings up for travel. Confirm ratings on the live card.

Open live 28115 product →

Parts-counter note. Match the jack mount to your trailer frame. Swivel pipe-mount jacks such as CURT 28321 and CURT 28324 swing clear for travel. Add CURT 28272 when soft ground needs a foot pad instead of a narrow wheel.

Shop CURT 28321 swivel jack

Shop CURT 28272 jack foot

Jack wheel versus foot

How to choose wheel versus foot without drama

Step 1Know the move

Rolling into a stall favors a caster wheel. Long-term parking on soft ground favors a foot pad.

Step 2Read both ratings

Check support and lift capacity on the jack card, then confirm the foot rating if you add a pad.

Step 3Watch the surface

Grass, gravel, and hot asphalt punish narrow wheels. A wider pad keeps the tongue from sinking.

Step 4Swing clear for travel

Use the swivel pull-pin so the jack locks up before you tow. Recheck the pin after the first few kilometres.

Caster wheel path

28115 with eight inch wheel

Best when you regularly walk a light trailer across firm pavement.

  • Side-wind handle on the live card
  • Swivel bracket swings up for travel
  • Confirm frame size and capacity before you cart
Swivel jacks

28321 and 28324

Pipe-mount swivel jacks when you need the jack to clear for travel.

  • Side-wind handles on the live titles
  • Pull-pin locks the swivel for storage or travel
  • Pair with a foot pad when soft ground is the real problem
Soft-ground honesty

28272 foot pad

Wider contact beats a skinny wheel on lawn and gravel.

  • Pin-on foot for two inch jack tubes on the live card
  • Open jack foot pad tips for parking habits
  • No invented legal cutoffs on this page

Stocked CURT jack gear on this shelf

These live cards are storefront available on this store today. Confirm mount style, capacity, travel, and whether you need a wheel or a foot before you order.

Topic What we tell shoppers
Caster wheel use Best for rolling a light trailer on firm pavement. Keep the move slow and watch the tongue weight.
Foot pad use Better on grass, gravel, and soft asphalt. See jack foot pad tips.
Wheel versus foot Open jack wheel versus foot when you want the full decision guide.
Tongue jack habits Raise, lower, and unhitch safely with tongue jack tips.
Legal cutoffs We will not invent them here. Read the live jack and foot cards plus your trailer tongue weight.

Related guides worth opening next

Parts-counter summary: for moving a light trailer by hand in Canada, start with live CURT 28115 when you need a caster wheel, keep CURT 28321 or CURT 28324 for swivel travel clearance, add CURT 28272 when soft ground needs a foot pad, open the wheel-versus-foot and tongue-jack guides before you invent a legal cutoff, and confirm every rating on the live cards.