Metra Electronics AX-MLOC720 2-Channel Mini 80W Loc; w/Turn On; Metra Electronics AX-MLOC720

A 2 Channel Adjustable, Line Output Converter (LOC) with Built-in Amplifier RemoteGenerator. The LOC is designed to convert (2) channels of speaker level audio into(2) channels of line level audio that can be used by OEM amplifiers. It can also be usedwith OEM radios to add aftermarket amplifiers. This device will also detect the presenceof an audio signal and then generate a +12V output that can be used to turn-on anaftermarket amplifier. The LOC is able to handle 80 watts per channel continuous input without over heating.The input circuitry is designed to correct the crossover distortion commonly found onstandard LOCs while providing a high to low level step down of 6:1. Output audio level isinfinitely adjustable using the onboard, high quality potentiometers. The remote outputor amplifier trigger is rated at 500mA (+12V) and will easily handle an outboard relayif additional current is needed. The remote output will trigger instantaneously when theLOC detects a DC voltage on the white, left + audio input wire above 5V or a very lowaudio signal. It will shut off 60 seconds after no signal is detected. The LOC should be installed on a stereos speaker output wires or the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the output of an OEM amplifier, or on the input terminals on the OEM speakers.

Specifications:

WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Description_DES	2-Channel Mini 80W Loc
Description_EXT	2-Channel Mini 80W Loc; w/Turn On;
Description_FAB	Universal
Description_FAB	Worlds Smallest L.O.C
Description_FAB	2 Channel Input
Description_FAB	Adjustable Gain For Each Channel
Description_FAB	80 Watt Max Per Channel
Description_FAB	12 Volt Signal Sense Turn On
Description_FAB	Amplifier Trigger Is Rated At 500mA +12V
Description_FAB	Easily Handle An Outboard Relay
Description_MKT	A 2 Channel Adjustable, Line Output Converter (LOC) with Built-in Amplifier RemoteGenerator. The LOC is designed to convert (2) channels of speaker level audio into(2) channels of line level audio that can be used by OEM amplifiers. It can also be usedwith OEM radios to add aftermarket amplifiers. This device will also detect the presenceof an audio signal and then generate a +12V output that can be used to turn-on anaftermarket amplifier. The LOC is able to handle 80 watts per channel continuous input without over heating.The input circuitry is designed to correct the crossover distortion commonly found onstandard LOCs while providing a high to low level step down of 6:1. Output audio level isinfinitely adjustable using the onboard, high quality potentiometers. The remote outputor amplifier trigger is rated at 500mA (+12V) and will easily handle an outboard relayif additional current is needed. The remote output will trigger instantaneously when theLOC detects a DC voltage on the white, left + audio input wire above 5V or a very lowaudio signal. It will shut off 60 seconds after no signal is detected. The LOC should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the output of an OEM amplifier, or on the input terminals on the OEM speakers.
Description_MKT	A 2 Channel Adjustable, Line Output Converter (LOC) with Built-in Amplifier RemoteGenerator. The LOC is designed to convert (2) channels of speaker level audio into(2) channels of line level audio that can be used by OEM amplifiers. It can also be usedwith OEM radios to add aftermarket amplifiers. This device will also detect the presenceof an audio signal and then generate a +12V output that can be used to turn-on anaftermarket amplifier. The LOC is able to handle 80 watts per channel continuous input without over heating.The input circuitry is designed to correct the crossover distortion commonly found onstandard LOCs while providing a high to low level step down of 6:1. Output audio level isinfinitely adjustable using the onboard, high quality potentiometers. The remote outputor amplifier trigger is rated at 500mA (+12V) and will easily handle an outboard relayif additional current is needed. The remote output will trigger instantaneously when theLOC detects a DC voltage on the white, left + audio input wire above 5V or a very lowaudio signal. It will shut off 60 seconds after no signal is detected. The LOC should be installed on a stereos speaker output wires or the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the output of an OEM amplifier, or on the input terminals on the OEM speakers.
Description_SHO	Line Level Converter