Metra Electronics AX-MLOC740 4-Channel Mini 80W Loc; w/Turn On; Metra Electronics AX-MLOC740

The Line Output Converter (LOC) should be installed on a stereos speaker output wiresor the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the outside of an OEM amplifier, or on theinput terminals on the OEM speakers. The LOC is designed to convert (4) channels of speaker level audio into (4) channels of line level audio. This allows for the installation of line level products such as amplifiers, EQs and crossovers on systems that do not have RCA line level outputs. In addition this device will also detect the presence of an audio signal and then generate a +12V output that can be used to turn-on an aftermarket amplifier.

Specifications:

WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Description_DES	4-Channel Mini 80W Loc
Description_EXT	4-Channel Mini 80W Loc; w/Turn On;
Description_FAB	Worlds Smallest L.O.C.
Description_FAB	4 Channel Input
Description_FAB	Adjustable Gain For Each Channel
Description_FAB	80 Watt Max Per Channel
Description_FAB	12 Volt Signal Sense Turn On
Description_FAB	The Loc Will Shut Off 60 Seconds After No Signal Detected
Description_FAB	6-1 Step Down With Variable Output
Description_FAB	Gold Flashed RCAs
Description_MKT	The Line Output Converter (LOC) should be installed on a stereo's speaker output wiresor the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the outside of an OEM amplifier, or on theinput terminals on the OEM speakers. The LOC is designed to convert (4) channels of speaker level audio into (4) channels of line level audio. This allows for the installation of line level products such as amplifiers, EQs and crossovers on systems that do not have RCA line level outputs. In addition this device will also detect the presence of an audio signal and then generate a +12V output that can be used to turn-on an aftermarket amplifier.
Description_MKT	The Line Output Converter (LOC) should be installed on a stereos speaker output wiresor the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the outside of an OEM amplifier, or on theinput terminals on the OEM speakers. The LOC is designed to convert (4) channels of speaker level audio into (4) channels of line level audio. This allows for the installation of line level products such as amplifiers, EQs and crossovers on systems that do not have RCA line level outputs. In addition this device will also detect the presence of an audio signal and then generate a +12V output that can be used to turn-on an aftermarket amplifier.
Description_SHO	Line Level Converter