AEM Electronics 30-0311 Black Bezel and Black Faceplate AEM Electronics 30-0311

Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825", with a cup depth of only 0.200." This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.

Specifications:

Brand	AEM
Category	Gauges and Gauge Accessories
Emission Code	5
Gauge Diameter	2 1/16
Product Type	Wideband Gauge Kit
Sub Category	Instrument Panel
Warning	California Proposition 65
Warranty	Manufacturer's 1 Year Warranty
Brand	AEM
Category	Gauges and Gauge Accessories
Emission Code	5
Gauge Diameter	2 1/16
Product Type	Wideband Gauge Kit
Sub Category	Instrument Panel
Warning	California Proposition 65
Warranty	Manufacturer's 1 Year Warranty
Description_INV	X GAUGE KIT, OBD2
Description_DES	AEM X-Series OBDII Gauge Kit
Description_EXT	Black Bezel and Black Faceplate
Description_MKT	AEM's X-Series OBDII gauge (PN 30-0311) puts multiple channels of data at your fingertips by reading the CAN bus stream of your vehicle's OBD port and transmitting those channels to the gauge display. It reads Diagnostic Trouble Codes (DTCs) and gives you the ability to clear codes. Wiring is as simple as connecting the gauge to your vehicle's OBDII port using the supplied connector! Because the X-Series OBDII gauge reads OBDII parameters transmitted through a vehicle's CAN datastream, it will only work on 2008+ model year vehicles.
Description_MKT	EASY TO USE
Description_MKT	Use the 'Page' button on the gauge face to scroll through available channels of data transmitted through the OBD port. Possible channels are listed below and may include IAT, EGT, RPM, Ethanol %, MAF, Fuel Pressure, Manifold Pressure, Boost Pressure, TPS, Vehicle Speed, Lambda and more (channel availability is ultimately dependent upon what channels are programmed to transmit by the vehicle manufacturer).
Description_MKT	READ & CLEAR TROUBLE CODES
Description_MKT	The 'DTC' button tells the gauge to scan for trouble codes and will report any stored DTCs, allowing you to look them up and determine the course of repair. This button also allows users to cleat DTCs once the problem is resolved.
Description_MKT	The X-Series AEM OBD2 Gauge (PN 30-0311) has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED "needle" lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. X-Series Gauges come with a black bezel and faceplate, and an optional silver bezel/white faceplate accessory kit is available (PN 30-0311-ACC, sold separately).
Description_MKT	Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825", with a cup depth of only 0.200." This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.
Description_FAB	2-1/16th (52mm) gauge diameter for easy mounting in gauge pods
Description_FAB	Slim 0.825" overall gauge depth and 0.200" cup depth - mount them virtually anywhere!
Description_FAB	Programmable center LED is 87% larger than original AEM gauges
Description_FAB	24 green outer LEDs for quick reference to engine parameter
Description_FAB	Reads data channels from 2008+ MY vehicles through the OBDII port!
Description_FAB	Reads and clears Diagnostic Trouble Codes (DTCs)!
Description_FAB	Optional silver bezel and white faceplate accessory kit available (sold separately)
Description_FAB	Auto dimming sensor delivers ideal display brightness
Description_FAB	Positive locking connectors provide secure connection
Description_INV	X GAUGE KIT, OBD2
Description_DES	AEM X-Series OBDII Gauge Kit
Description_EXT	Black Bezel and Black Faceplate
Description_MKT	AEM's X-Series OBDII gauge (PN 30-0311) puts multiple channels of data at your fingertips by reading the CAN bus stream of your vehicle's OBD port and transmitting those channels to the gauge display. It reads Diagnostic Trouble Codes (DTCs) and gives you the ability to clear codes. Wiring is as simple as connecting the gauge to your vehicle's OBDII port using the supplied connector! Because the X-Series OBDII gauge reads OBDII parameters transmitted through a vehicle's CAN datastream, it will only work on 2008+ model year vehicles.
Description_MKT	EASY TO USE
Description_MKT	Use the 'Page' button on the gauge face to scroll through available channels of data transmitted through the OBD port. Possible channels are listed below and may include IAT, EGT, RPM, Ethanol %, MAF, Fuel Pressure, Manifold Pressure, Boost Pressure, TPS, Vehicle Speed, Lambda and more (channel availability is ultimately dependent upon what channels are programmed to transmit by the vehicle manufacturer).
Description_MKT	READ & CLEAR TROUBLE CODES
Description_MKT	The 'DTC' button tells the gauge to scan for trouble codes and will report any stored DTCs, allowing you to look them up and determine the course of repair. This button also allows users to cleat DTCs once the problem is resolved.
Description_MKT	The X-Series AEM OBD2 Gauge (PN 30-0311) has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED "needle" lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. X-Series Gauges come with a black bezel and faceplate, and an optional silver bezel/white faceplate accessory kit is available (PN 30-0311-ACC, sold separately).
Description_MKT	Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825", with a cup depth of only 0.200." This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.
Description_FAB	2-1/16th (52mm) gauge diameter for easy mounting in gauge pods
Description_FAB	Slim 0.825" overall gauge depth and 0.200" cup depth - mount them virtually anywhere!
Description_FAB	Programmable center LED is 87% larger than original AEM gauges
Description_FAB	24 green outer LEDs for quick reference to engine parameter
Description_FAB	Reads data channels from 2008+ MY vehicles through the OBDII port!
Description_FAB	Reads and clears Diagnostic Trouble Codes (DTCs)!
Description_FAB	Optional silver bezel and white faceplate accessory kit available (sold separately)
Description_FAB	Auto dimming sensor delivers ideal display brightness
Description_FAB	Positive locking connectors provide secure connection