Pro Comp Suspension 4042 Driveshaft C/V Style; 0 - 4 in. Lift; Rear; Pro Comp Suspension 4042

Pro Comp Suspensions new U-joint style drive shafts are the perfect upgrade for vehicles with 0-4 inches of lift. When lifted, the drive-line angles are increased, which increases the potential for drive-line vibration. Pro Comp U-joint style drive shafts will allow for vehicle operation in 4WD at speeds above 25 mph. The factory drive shaft ball and cage design joint is replaced with #1310 style u-joints to allow for a stronger engagement, increase the range of motion, and improve seal and drive-line life. Exclusive yokes, not flange adapters, are used to allow for a longer drive shaft, unlike our competitors versions. Pro Comp Suspension front drive shafts are constructed from 2 in. x .12 in. DOM (drawn-over-mandrel) steel tube. Kits come complete with necessary mounting hardware.

Specifications:

Horsepower Rating	OEM
Material	Steel
Position	Rear
Usage	OEM
WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Description_DES	Driveshaft C/V Style
Description_EXT	Driveshaft C/V Style; 0 - 4 in. Lift; Rear;
Description_FAB	Driveshaft Fits 3.625in. Wide Differential Pinion
Description_FAB	High Quality Spicer CV Style Drive Shaft
Description_FAB	Designed To Work With The Tail Shaft Kit
Description_MKT	Pro Comp Suspensions new U-joint style drive shafts are the perfect upgrade for vehicles with 0-4 inches of lift. When lifted, the drive-line angles are increased, which increases the potential for drive-line vibration. Pro Comp U-joint style drive shafts will allow for vehicle operation in 4WD at speeds above 25 mph. The factory drive shaft ball and cage design joint is replaced with #1310 style u-joints to allow for a stronger engagement, increase the range of motion, and improve seal and drive-line life. Exclusive yokes, not flange adapters, are used to allow for a longer drive shaft, unlike our competitors versions. Pro Comp Suspension front drive shafts are constructed from 2 in. x .12 in. DOM (drawn-over-mandrel) steel tube. Kits come complete with necessary mounting hardware.
Description_SHO	Drive Shaft