Holley Sniper EFI 19-102 Sniper EFI Fuel Tank System 255 LPH Holley Sniper EFI 19-102

Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 255 lph fuel pump, internal baffling, and a fuel level sender. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project! Steel filler neck that extends to rear valance is not included. You must use your existing stock filler neck or purchase the 19-550 replacement filler neck. These tanks are perfect for your next classic truck EFI conversion project as well. Supports up to 550 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Size: 32-3/4" x 24-1/2" x 7-1/2" For a better seal use Permatex Indian Head Gasket Shellac Compound or Aviation Form-A-Gasket sealant on the gasket and screws.

Specifications:

Application	1964-1968 Mustang
8920	Yes
8919	Yes
Brand	Holley Sniper EFI
Category	Air and Fuel Delivery
Color	Silver
Drain Plug	No
Emission Code	3
4297	No
Finish	Powdercoated
Free Flow LPH	255
Fuel Sending Unit Ohms	73-10 Ohms
8918	Electronic Fuel Injection
Fuel System Type	Gasoline
8917	Powder Coated
Gallon Capacity	16
3390	Performance
4284	Yes
Material	Steel
Maximum Flow Rating	255 LPH
4295	No
New Straps Included	No
8137	Yes
part type	Fuel Tank and Pump Assembly Combination
Product Type	Fuel Tank
Resistance Ohms Empty	73 82
Resistance Ohms Full	10 82
4296	Yes
Sub Category	Fuel Pumps and Related Components
Tank Capacity	16 GA
1918	Gray
305	Steel
Warning	California Proposition 65
Warranty	Manufacturer's Limited 90 Day Warranty
Description_ABR	SNIP FTAPAC
Description_SHO	Sniper EFI Fuel Tank
Description_INV	196468 MUSTANG COATED TANK EFI GAS
Description_ASC	When installing sending units, please remember to rotate the unit until the mounting holes align with the flange holes in the tank.Steel filler neck that extends to rear valance is not included. You must use your existing stock filler neck or purchase the 19-550 replacement filler neck.
Description_DES	Sniper EFI Fuel Tank System 255 LPH
Description_EXT	1964-1968 Ford Mustang / Mercury Cougar - Coated Tank - EFI - Gasoline
Description_MKT	Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 255 lph fuel pump, internal baffling, and a fuel level sender. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project! Steel filler neck that extends to rear valance is not included. You must use your existing stock filler neck or purchase the 19-550 replacement filler neck. These tanks are perfect for your next classic truck EFI conversion project as well. Supports up to 550 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Size: 32-3/4" x 24-1/2" x 7-1/2" For a better seal use Permatex Indian Head Gasket Shellac Compound or Aviation Form-A-Gasket sealant on the gasket and screws.
Description_FAB	Tanks are coated galvanized steel then powder coated silver for total corrosion protection 255 lph fuel pump with hanger assembly gives you the fuel you need with in-tank quietness Sender has ¼” NPT Supply and Return line ports for easy fuel line connection and a barbed vent fitting Fuel level sender included with the correct Ohm range for your factory gauges Fuel pump and sender are recessed in the tank to provide an easy installation with no modification to your car EFI style tank baffling includes a large 4.3 liter internal fuel tray to prevent fuel pump starvation Fits and looks like an OE tank when installed Complete bolt in solution for your EFI conversion

This Part Fits:

Year	Make	Model	Submodel	Notes
1964	Ford	Mustang
1965	Ford	Mustang
1966	Ford	Mustang
1967	Ford	Mustang
1968	Ford	Mustang
1967	Mercury	Cougar
1968	Mercury	Cougar