Skyjacker TCR25S REAR SPRG; 2.5IN. 98-04 TACOMA Skyjacker TCR25S

Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.

Specifications:

Lift/Drop Height	2.5 in.
Lift/Drop Height	3 in.
WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	California Residents- WARNING: Cancer and-or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov)
Description_DES	REAR SPRG; 2.5IN. 98-04 TACOMA
Description_EXT	REAR SPRG;2.5in.98-04 TACOMA
Description_FAB	Constructed As Progressive Multileaf Packs
Description_FAB	Load Capacity Will Be Equal or Greater Than OE
Description_FAB	Made With American Steel
Description_FAB	Limited Lifetime Warranty
Description_FAB	Coils Available Separately
Description_INV	REAR SPRG;2.5in.98-04 TACOMA
Description_MKT	Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Description_SHO	Leaf Spring