Dedenbear TS6S THROTTLE STOP; DISC TYPE; DOM. HOLLEY/KING DEMON (SML BORE; TAPERS TO 1 7/8in.) Dedenbear TS6S

Dedenbears TS6 Disc style base plate throttle stops sit underneath the carburetor and operates two rotating discs which pinch off air/fuel flow while allowing the carburetor to remain in wide open position in order to help assist a drag car in an electronics class precisely dial in to a pre-determined ET (such as Super classes) or to aid in running a higher MPH for a given ET. This CO2 operated stop has no airflow restrictions when completely open, allowing your engine to reach maximum performance when the stop is not engaged, making it perfect for huge horsepower applications that tend to spin the tires when a conventional throttle stop opens or unloads the chassis when it closes. Repeatability is ensured by using needle roller bearings on all moving parts, finely polished air cylinder, high temperature seals, and stainless steel and brass construction on most of the parts coming into contact with the air/fuel flow. The result is silky smooth movement and precise positioning of the air flow discs. At only 1 5/8 inches tall, hood scoop clearance is typically not a problem. Closing adjustment is located at the end of the air cylinder for easy, accurate settings. This TS6S model is designed specifically for small 1 7/8 (1.875) inch bore carburetor applications and engine applications which are 500 CID or smaller or on larger displacement engines which need a lower throttle stopped RPM.

Specifications:

Description_DES	THROTTLE STOP; DISC TYPE; DOM. HOLLEY/KING DEMON (SML BORE; TAPERS TO 1 7/8in.)
Description_EXT	THROTTLE STOP; DISC TYPE; DOM. HOLLEY AND KING DEMON (SMALL BORE; TAPERS TO 1 7/8in.)
Description_FAB	Designed Specifically For The Highest Mile Per Hour Cars
Description_FAB	Fits Holley Dominator 4500 Style And King Demon Carburetors
Description_FAB	2in. Bore Size/Suitable For Most Applications
Description_FAB	No Butterflies To Restrict Flow Or Horsepower
Description_FAB	Co2 Operation/Incl. Premium 4 Way Solenoid/Fittings
Description_FAB	1/4in. Line Required For Installation
Description_FAB	Needle Roller Bearings Used On All Moving Parts
Description_FAB	Air On/Air Off Operation Allows Fine Tuning Of Chassis Unloading
Description_FAB	Centered Openings For Best Repeatability
Description_FAB	Corrosion Resistant Stainless Steel And Brass Construction Used
Description_INV	THROTTLE STOP; DISC; SMALL BORE
Description_MKT	Dedenbears TS6 Disc style base plate throttle stops sit underneath the carburetor and operates two rotating discs which pinch off air/fuel flow while allowing the carburetor to remain in wide open position in order to help assist a drag car in an electronics class precisely dial in to a pre-determined ET (such as Super classes) or to aid in running a higher MPH for a given ET. This CO2 operated stop has no airflow restrictions when completely open, allowing your engine to reach maximum performance when the stop is not engaged, making it perfect for huge horsepower applications that tend to spin the tires when a conventional throttle stop opens or unloads the chassis when it closes. Repeatability is ensured by using needle roller bearings on all moving parts, finely polished air cylinder, high temperature seals, and stainless steel and brass construction on most of the parts coming into contact with the air/fuel flow. The result is silky smooth movement and precise positioning of the air flow discs. At only 1 5/8 inches tall, hood scoop clearance is typically not a problem. Closing adjustment is located at the end of the air cylinder for easy, accurate settings. This TS6S model is designed specifically for small 1 7/8 (1.875) inch bore carburetor applications and engine applications which are 500 CID or smaller or on larger displacement engines which need a lower throttle stopped RPM.
Description_SHO	THROT STP DSC S BORE
Description_TLE	Dedenbear Warranty
Description_LAB	Proposition 65