Fabtech K7086 Uniball UCA Lift System Fabtech K7086

Fabtech's high quality Tundra lift kit offers increased height to run 33 in. or 35 in. tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance. The factory Tundra upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires. The Fabtech upper control arms are constructed of the finest material with .120 in. wall 1.25 in. OD 4130 Chromoly steel tubing. High quality 1 in. FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Tundra upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel. The factory front Coilover shocks receive spacers that provide lift while keeping the stock ride quality. Rear lift is accomplished using coil spring spacers that provide the additional ride height. The rear shocks are replaced with Fabtech Stealth monotube shocks for an enhanced on and offroad ride. This Tundra lift kit is an affordable suspension upgrade for enthusiasts that desire to run 33 in. or 35 in. tall tires with Fabtech quality and strength.

Specifications:

Lift/Drop Height	3 in.
WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Description_DES	Uniball UCA Lift System
Description_EXT	Uniball UCA Lift System; 3 in. Lift; UCA Kit w/Uniball; Front Shock Spacer; Rear Coil Spacer; Rear Perfomance Shocks;
Description_FAB	Arms Eliminate Upper Ball Joint
Description_FAB	Arms Super Strong 1 in. ID Stainless American Uniball
Description_FAB	17-4 Stainless Steel Heat Treated Uniball Pin
Description_FAB	Arms Are Direct Replacements For Factory Arms
Description_FAB	For Suspensions That Require Additional Strength/Alignability
Description_MKT	Fabtech's high quality Tundra lift kit offers increased height to run 33 in. or 35 in. tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance. The factory Tundra upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires. The Fabtech upper control arms are constructed of the finest material with .120 in. wall 1.25 in. OD 4130 Chromoly steel tubing. High quality 1 in. FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Tundra upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel. The factory front Coilover shocks receive spacers that provide lift while keeping the stock ride quality. Rear lift is accomplished using coil spring spacers that provide the additional ride height. The rear shocks are replaced with Fabtech Stealth monotube shocks for an enhanced on and offroad ride. This Tundra lift kit is an affordable suspension upgrade for enthusiasts that desire to run 33 in. or 35 in. tall tires with Fabtech quality and strength.
Description_SHO	Lift Kit-Suspension