XRC GEN 2 Front Bumper Smittybilt 76807LT

The XRC Gen 2 Max Front Stubby Bumper Has A High Degree Approach Angle And Raised Corners To Maximize Ground Clearance. The Bumper Is Manufactured From 3/16 Cold Rolled Steel And Then Robotically Welded To The Exact Specifications. The Solid D-Ring Mounts Are Welded On The Inside And Outside (D-Rings Sold Separately). Welds Are Ground Down And Smoothed Out, Then A Three Stage Light Texture Black Powder Coat Is Applied For The Ultimate Look. The Front Stinger Is 1.75 Tubing And Has Light Tabs That Can Hold Up To Two 9 in. Lights (Lights Sold Separately). The Bumper Is Winch Ready And Can Carry Winches Up To A 10,000 Lb. Rating. The Gen 2 Front Bumper Comes With Fog Light Cutouts.

Specifications:

Bumper Style	Winch Mount
Color	Black
WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Description_DES	XRC GEN 2 Front Bumper
Description_EXT	XRC GEN 2 Front Bumper; Lite Textured Black; Incl. D-Rings; Winch Plate[Up to 12000 lb.]; O.E. Fog Light Ports [Lights Not Included];
Description_FAB	Light Texture Black Finish
Description_FAB	New Gen2 solid d-ring and jack point mount - welded on the inside and out
Description_FAB	Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
Description_FAB	1.75 in. 120 Wall Over Rider And Kickers
Description_FAB	Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
Description_FAB	O.E. fog light provision
Description_FAB	Manufactured from 3/16 in. cold rolled steel
Description_FAB	Tow-able D-ring mounts
Description_FAB	Compatible With the Alpine Front Facing Camera; HCE-C2600FD4;Sold Separately
Description_FAB	Powder coat finish with 5-year limited warranty
Description_FAB	Smittybilt Advantage Lifetime Warranty
Description_MKT	The XRC Gen 2 Max Front Stubby Bumper Has A High Degree Approach Angle And Raised Corners To Maximize Ground Clearance. The Bumper Is Manufactured From 3/16 Cold Rolled Steel And Then Robotically Welded To The Exact Specifications. The Solid D-Ring Mounts Are Welded On The Inside And Outside (D-Rings Sold Separately). Welds Are Ground Down And Smoothed Out, Then A Three Stage Light Texture Black Powder Coat Is Applied For The Ultimate Look. The Front Stinger Is 1.75 Tubing And Has Light Tabs That Can Hold Up To Two 9 in. Lights (Lights Sold Separately). The Bumper Is Winch Ready And Can Carry Winches Up To A 10,000 Lb. Rating. The Gen 2 Front Bumper Comes With Fog Light Cutouts.
Description_SHO	Bumper- Front